When titanium alloy is milled at low speed in an inert gas medium, the milling deformation coefficient is greater than 1.0; But in the atmosphere, when the milling speed Vc=30 m/min, the chip deformation coefficient is less than 1.0. This is....
In the process of CNC turning and milling titanium alloy, the matters that should be paid attention to are: (1) Due to the small modulus of elasticity of titanium alloy, the clamping deformation and force deformation of the workpiece during....
Set the geometric parameters of turning and milling titanium tools to improve the product quality of titanium alloy parts. Products are delivered quickly and on time. (1) The rake angle of the tool 0: The contact length between titanium allo....
CNC machining of titanium alloys should start from two aspects: reducing cutting temperature and reducing adhesion. Select tool materials with high thermal hardness, high bending strength, good thermal conductivity, and poor affinity with ti....
Turning and milling are particularly difficult when the hardness of titanium alloy is greater than HB350. When the hardness of titanium is less than HB300, the sticking phenomenon is likely to occur, and it is also difficult to cnc cutting.....
KN95 Mask Machine Roller, Stamping Shaft and Press Wheel
1. The embossing roller cart of the mask machine is made of seamless steel pipe, and then processed by CNC. Processing is divided into turning, milling and welding. 2. Turning and milling: turn....
Flat face mask machine accessories, embossing shaft, press wheel, mask machine roller, roller
The roller is the main part of the rolling mill. It is subject to a certain impact during actual use, and the surface is rubbed by high-speed, high-tempera....
The machining of plastic products or parts can be divided into two categories: single-edge tool machining and multi-blade tool machining. Single-edge tool processing includes turning, planing, and toothless saw processing. Multi-edge tool pr....
This article introduces several CNC turning technologies for very specification materials: products include turning of soft rubber, turning of grinding wheels, turning of cemented carbide, turning of ceramics, turning of composite materials.....
This article analyzes the process settings for turning hardened steel, high temperature alloy, titanium alloy, chilled cast iron, and thermal spray material parts. And the characteristics of these difficult-to-cut materials, cutting quantiti....