5 axis milling of turbine impeller
11 可能
5-軸加工技術

5 axis milling machining of turbine impeller

Before adopting 5-axis CNC machining centers, most turbomachinery manufacturers used 3-axis or 4-axis machine tools to process impellers, and most of them used point machining. 那是, every point on the blade surface is processed into a point by the tool tip. When the tool moves along the surface of the blade, it will leave some pits or residual sharp corners, and the height of these pits or sharp corners depends on the programming skills. Point processing is also a feasible method, but this method has some unavoidable disadvantages:

繼續閱讀

Difficulties in CNC machining of large impeller blades
11 可能
5-軸加工技術, 銑削技術

Difficulties in milling large blades of impellers

In the CNC machining of the impeller blades, the machining of large impeller blades is the most difficult. Mastering the measures to solve the processing difficulties of large blades has a very positive effect not only on the large blade itself, but also on the impeller moving blades, impeller stationary blades, guide impeller blades and impeller end blades.

繼續閱讀