Standart dışı OEM Küçük elektronik torna parçaları

Firmamız çeşitli endüstriler için her türlü hassas otomatik torna işleme parçasını özelleştirmektedir., özellikle elektronik endüstrisi. Şu anda, Dünyaca ünlü birçok firma için yüzlerce ürün geliştirildi. Araştırma ve geliştirme konusunda zengin deneyime sahiptir.
Ana malzemeler: alüminyum, bakır, paslanmaz çelik, titanyum, alaşım, çelik, ütü, karbon çelik, magnezyum, plastik, akrilik
Otomatik tornaların yanı sıra, yardımcı ekipmanlar var: masaüstü torna tezgahları, sondaj makineleri, freze makineleri (kanal açma makineleri), kılavuz çekme makineleri, haddeleme makineleri, vesaire., Otomatik torna işleme parçalarının daha fazla işlemini tamamlayabilen.
Sol, otomatik bir tornanın tipik bir dönme kısmıdır: Enjeksiyon kalıplamada kullanılan gömülü somun

Non-standard stainless steel screws, special thread turning parts, vesaire.
Our company can also customize. Örneğin, multi-step screws, products that cannot be extruded by cold forging machines. Or products with high dimensional accuracy requirements, as well as threaded parts, vidalar, vesaire. with complex shapes.
Malzeme: paslanmaz çelik / bakır / free cutting steel / alüminyum / karbon çelik.
The left is stainless steel turning parts, click the left picture to see more stainless steel turning parts

Genel konuşma, the inner hole tolerance can reach 0.02MM (if it is stainless steel or free-cutting steel products, it is 0.03). Aynı zamanda, flat-bottomed holes can be processed by hook cutters, and step holes can be drilled by forming drills (except for eccentric holes). The inner hole roughness can be up to 0.8.
We can develop various parts and hardware non-standard turning parts according to customer drawings.
Not: All the products produced by our company are products with a maximum outer diameter of 20MM (the length is not limited)
Left is a copper turning part, see more copper turning parts

Small turning electronic pins. Used in electronic signal connectors and connector pins.
Genel konuşma, the tolerance of the outer cylindrical shaft surface can reach 0.01MM (if it is copper, it can reach 0.005MM), and the surface roughness can reach 0.8. Centerless grinding is used for the outer circle, the tolerance can reach 0.001mm, and the surface roughness can reach 0.2um. This is a non-standard turned part that cannot be achieved by cold forging. Tiny machining parts, non-standard turning parts and lathe parts

Non-standard turning parts:
The automatic lathe is used for one-time completion. The spherical accuracy reaches 0.01mm. This is also something that cold piers cannot achieve. The surface of the product can achieve a mirror-like effect (not a polishing effect, but just a turning effect)
The left is the effect of iron turning parts after oxidation and blackening. And the products after milling of iron parts