விசித்திரமான தண்டின் CNC திருப்பம்

What is an eccentric shaft?
விசித்திரமான தண்டு அல்லது விசித்திரமான வட்டு மற்றும் விசித்திரமான ஸ்லீவ் ஆகியவற்றின் CNC எந்திரம்
வெளி வட்டத்தின் அச்சு மற்றும் வெளி வட்டம் இணையாக உள்ளன, ஆனால் ஒன்றுடன் ஒன்று சேராத பணிப்பகுதிகள் விசித்திரமான தண்டுகள் என்று அழைக்கப்படுகின்றன. விசித்திரமான தண்டு பொதுவாக ஒரு விசித்திரமான துளை வழியாக மோட்டாரின் சுழலும் தண்டின் மீது சரி செய்யப்படுகிறது.. மோட்டார் தொடங்கும் போது, ஒரு கேம் இயக்கம் செய்யுங்கள். எனவே, இது ஆட்டோமொபைல்களில் பரவலாகப் பயன்படுத்தப்படுகிறது, இயந்திரங்கள், குழாய்கள், முதலியன.

CNC machining of eccentric workpieces
An eccentric workpiece is a workpiece whose outer circle and outer circle or the axis of the outer circle and the inner hole are parallel and not coincident, and offset a certain distance. The distance between these two parallel axes is called the eccentricity. The outer circle and outer circle eccentric parts are called eccentric shaft or eccentric disc; Parts with eccentric outer circle and inner hole are called eccentric sleeve

Eccentric crankshaft machining of motorcycle

Machining of eccentric shaft
The processing of eccentric parts is a difficult point in mechanical processing. For the processing of large parts such as eccentric bearings and cams, three-jaw and four-jaw chucks are commonly used for processing on ordinary machine tools. With the continuous development of science and technology, the demand for eccentric parts is increasing, and the accuracy is getting higher and higher. எனவே, the demand for this type of eccentric fixture has also increased correspondingly, and its application prospects are broad. Eccentric shaft parts are one of the common and typical turning parts. According to the different structure of eccentric shaft parts: Generally can be divided into: optical axis eccentricity, stepped shaft eccentricity and special-shaped eccentric shaft, முதலியன; Or solid eccentric shaft, hollow eccentric shaft, முதலியன. They are also used to support transmission parts such as gears and pulleys in the machine to transmit torque or movement.

துருப்பிடிக்காத எஃகு விசித்திரமான சக்கரத்தின் CNC எந்திரம்

Method of machining eccentric shaft
Turning eccentric shafts mainly take measures in terms of clamping, to align the axis of the eccentric part to be processed and coincide with the axis of the main shaft of the lathe.
1. Turning an eccentric workpiece on a 4-jaw single-action chuck
Turning For eccentric workpieces with a small number of machining and low precision, the four-jaw chuck is generally used for clamping. When turning an eccentric workpiece on a four-jaw chuck, you must first mark the workpiece. It is to draw an eccentric circle and a cross line to ensure the horizontal and vertical directions. In order to determine its position in the four-jaw chuck based on these lines.

2. Machining eccentric workpieces on a 3-jaw self-centering chuck
When the machining eccentricity is small (e≤5-6mm), the length is short, and the number of eccentric workpieces is large. It can be processed by the three-jaw self-centering chuck. When turning, the outer circle and length are turned first. Then it is clamped on a three-jaw chuck, and a shim is placed on one of the jaws to make the workpiece eccentric for turning. The thickness of the pad can be calculated by the following formula. X=1.5e×(1-e/2d) (X = gasket thickness; e = the eccentricity of the workpiece; d = the diameter of the gripping part of the three jaws). In actual turning, due to the deviation of the contact position between the long claw and the workpiece, a correction constant needs to be added to the deformation after the shim is clamped. x real = x+1.5△e (x real = actual gasket thickness; x = calculated thickness; △e = The measured eccentricity error after the test)

Outer spherical bearing with eccentric sleeve

3. Turning the eccentric shaft workpiece on the double chuck
This method is to clamp the 3-jaw self-centering chuck on the 4-jaw single-action chuck for alignment. After moving an eccentric distance, it is clamped, and the eccentric turning can be done by clamping the workpiece on the three-jaw self-centering chuck. This eliminates the need to correct the workpiece. When moving the position of the 3-jaw chuck, first clamp the optical axis in the 3-jaw self-centering chuck, and use a dial indicator to determine the eccentricity. Finally confirm the position of the 3-jaw chuck in the 4-jaw chuck.

4. Turning eccentric shaft workpiece between two thimble
The longer eccentric shaft workpiece can be clamped between two thimble for turning, and the chicken core clamp is used to drive the workpiece to rotate. The center of the two ends of the eccentric shaft workpiece processed between two thimbles, and the eccentric center hole is generally processed on a boring machine. Because it is difficult to ensure that the eccentric shaft at both ends of the eccentric shaft and the direction of the eccentric hole are consistent and parallel on a lathe.

5. Load the eccentric workpiece on the eccentric chuck
The eccentricity of the eccentric chuck is easy to adjust, has strong versatility and high precision. It is an ideal turning eccentric tool.

6. Turning eccentric workpieces on special fixtures
When the machining length is short, the precision is high, and the number of eccentric workpieces is large, it can be turned on a special fixture.

7.When actually processing eccentric workpieces with large eccentricity and low precision requirements.
Sum up another clamping method, three-jaw boring position plus gasket clamping: When the three-jaw self-centering fixture is used to set the jaws, first move the No. 1 jaw, and then lightly adjust the chuck, so that the end face of the chuck rotates about one or two turns. Then put on the 2 மற்றும் 3 jaws to make the 3 jaws of the chuck naturally eccentric. Since this eccentricity is not adjustable, it is necessary to add a gasket to adjust it. The advantage of this method is that it is simple, convenient and fast, but the disadvantage is that the positioning accuracy is not high.