Sústruženie a frézovanie kombinované obrábanie rotačných dielov

obrábanie rotačných dielov
Vývoj sústružníckeho centra má značnú časť rotačných častí (niekto odhaduje, že to predstavuje asi 1/2). Okrem sústruženia, operácie ako frézovanie, vŕtanie, a vyžaduje sa aj poklepanie. Navyše, čas spracovania pre každý proces rotujúceho telesa je relatívne krátky. Preto, je naliehavé vykonať viacprocesné spracovanie zmesi na rotačnom tele pod jedným upnutím na obrábacom stroji, a nakoniec bolo v 70. rokoch vyvinuté zložené sústružnícke centrum.

V porovnaní s bežnými CNC sústruhmi, the turret tool post of the turning and milling center is equipped with power tools that can rotate the milling cutter, drill and tap. V rovnakom čase, the machine tool spindle also has the C-axis function that can be accurately indexed according to the CNC program and interpolated with the X-axis or Z-axis. This 3-axis (X, Z, C) the control can be performed at a turning center of one clamping part turning body turning, frézovanie, vŕtanie, tapping. Doteraz, it is still the most used composite machining machine tool for rotating parts in industrial production.

obrábanie rotačných dielov

Since then, the turning center has further developed in the direction of expanding the range of processing technology. In order to drill or mill holes or slots that deviate from the center line of the rotating body, a turret tool holder with Y-axis control has been developed. And correspondingly introduced a turning center controlled by 4 osi (X, Y, Z, C). Avšak, bez ohľadu na to, ako jednovretenové sústružnícke centrum rozširuje rozsah procesov, it still cannot solve the problem of the secondary machining of the back side of the rotating body under one clamping (to jest, the machining of the workpiece clamping end). Ako výsledok, double-spindle turning centers appeared in the 1980s. Most of the two spindles of this machine tool are arranged oppositely on the same axis, so that after turning and processing the main end of the rotating body, druhé vreteno automaticky odoberá obrobok z vretena na spracovanie upínacieho konca.

Pretože úlohy obrábania upínacieho konca sú vo všeobecnosti relatívne jednoduché, druhé vreteno sa zvyčajne nazýva podvreteno, a jeho sila je relatívne malá. Dvojvretenové sústružnícke centrum môže byť vybavené jedným nástrojovým stojanom, ale väčšinou ide o dva stanovištia nástrojov, in order to improve the processing efficiency and give full play to the potential of the machine tool. Axis of the body on the same side of the machine, equipped with mutually opposed spindles (18.65kW) and a secondary spindle (11kW). The speed of the two spindles is 0~4000r/min, a obe môžu byť ovládané osou C. The sub-spindle can also move along the axis to pick up the workpiece that has been machined on the spindle. A 10-tool turret tool post is provided above the main spindle and below the sub-spindle. Each tool position on the turret tool post can be equipped with a powered tool with a power of 3.7kW and a speed of 80-8000r/min. Horný stojan nástroja je ovládaný o 3 osi (X1, Y1, Z1), and the lower tool post is controlled by 2 osi (X2, Z2).

The rise of the turning center developed from the turning center. The 5-axis control (X, Y, Z, B, C) turning and milling center became a hot spot in the late 1990s. Not only has it further increased the B-axis control (to make the tool post rotate around the Y-axis), to drill and mill bevels. And instead of using the traditional turret tool post of the turning center, a high-speed and more powerful electric spindle tool post is used instead.

Since the electric spindle on the tool post can only be equipped with one tool at a time (the electric spindle is locked and does not rotate during turning), it is also equipped with an automatic tool changer and a tool magazine like a machining center. The milling and drilling capacity of this machine tool is equivalent to a small or medium-sized machining center. Its essence is to integrate a CNC lathe and a machining center, so it is named a turning-milling center.

The turning speed of the turning and milling center table is higher than that of the original machining center. V rovnakom čase, na (electric) spindle of the machine tool must be locked and a turning tool can be installed. The newly developed turning-milling center DMU80FD of German DMG company belongs to this type. The structure of DMU80FD is exactly the same as the company’s DMUP series machining center, and it has 5-axis and 5-face high-speed milling of the P series machining center. For all processing functions, the worktable of this machine adopts direct drive technology, the maximum speed is 500r/min, and the maximum speed of the machine tool spindle is also 2000r/min. Preto, after the workpiece is clamped on this machine tool, 5-sided and 5-axis machining and compound machining from milling, vŕtanie, nudný, tapping and turning can be realized efficiently.