Cylindrical parts with milling features on compound corners or multiple faces are very common. A factory that provides services for large-scale equipment and oil companies, and produces parts that require precise 5-axis contour machining and finishing. B-axis machine tools are usually used to manufacture slotted shafts, and to machine grooves and cuts on compound angles. Such factories also use B-axis machine tools to process complex polyhedrons, such as tool bodies and tool holders.
The size of the parts processed by the B-axis machine tool is various. It can process watch gears as small as 0.04 дюймы в диаметре, or metal castings as large as 20 дюймы в диаметре.
Для удовлетворения различных потребностей клиентов в механической обработке., Компания Methods Machine Tool предоставляет две модели станков Nakamura Tome, оснащенных осью B.. Станок STW-40 со стандартным устройством автоматической смены инструмента на 40 позиций предназначен для обработки крупных и тяжелых деталей.. Такой как: отливки и поковки, и может обрабатывать заготовки до 17 дюймы в диаметре. Однако, в ответ на потребности клиентов, Компания Methods Machine Tool теперь может предоставить уменьшенную модель станков с осью B., а именно NTJ (Револьверная головка оси B). The weight of this machine is only about half of the STW-40. The advantage is that it occupies a small area and is easy to maintain and operate compared to large-sized machine tools. NTJ is most suitable for machining smaller B-axis parts, such as joint tools up to 8 дюймы в диаметре.
Both of these models are equipped with a bar feed function, so it is possible to feed raw materials to the machine tool in a continuous flow method, and then perform B-axis cutting. Если необходимо, this processing can also be performed on part features equipped with compound angles. When evaluating parts and bar feed options, the factory should consider the size of the raw material. Although a large B-axis machine tool equipped with a bar feed function can handle larger bars, it is impractical to always load such specifications into the machine tool. Because bars are generally relatively long (up to 12 feet is not uncommon), human or robot lifting may be too heavy. Large materials are also difficult to cut, especially in cutting bars.
![Комплексная обработка цилиндрических деталей](https://cncpartss.com/wp-content/uploads/2024/05/image001-26.jpg)
Комплексная обработка цилиндрических деталей