Токарный нестандартный винт из нержавеющей стали

Special threaded parts are processed by turning hexagonal bars
Материал: SUS303 обычно используемый импортный нержавеющий материал,
В то же время, он также может быть обработан на станке с ЧПУ SUS410 / 416/420 (максимальная твердость при термообработке может достигать HRC65) и СУС316Ф (с более высокими антикоррозионными характеристиками)
Высокая точность и изысканный внешний вид. Особенно хорош длинный вал, ступенчатый тип, фрезерование, детали резьбового типа. Возможно изготовление по чертежам заказчика.. Максимальный внешний диаметр обработки 32 мм., максимальная длина обработки 800 мм или больше

The stainless steel nut with knurling is finished by one-time turning by an automatic lathe.
This is a universal part for the plastic industry. By heating the nut, it can be pressed into the preset hole of the plastic part and form a stainless steel internal thread after cooling. Our company also produces various other similar stainless steel embedded nuts, see stainless steel embedded nuts for details

A stainless steel turning part with internal threaded blind hole
The head has grooves and protruding sealing steps. The turning head becomes a groove for accommodating the rubber sealing ring, which can play a waterproof, oil-proof and sealing role after being installed on the workpiece. Большая картинка прилагается.

This is a stainless steel hexagonal support column
It is made of stainless steel hexagonal bar and is widely used in various circuit boards, cabinets, electrical products and other products. Its work is to connect two parts and play the role of supporting spacing together.
This is also a general purpose piece. See more products like stainless steel hexagonal isolation column

Stainless steel turning parts with internal and external threads. The thread of the left product in the picture is in the form of internal and external threads, with external thread M5 and internal thread M3.
The right in the picture is:
Stainless steel screw customized products, the surface roughness can reach 0.8um. Our company can process the products with the largest processing outer diameter below 20MM by automatic lathe. The outer diameter larger than 20MM can also be processed by multiple processes, with high precision and fast efficiency. It is widely used in all kinds of beautiful and anti-rust use places.
The axial section can be scanned up to 10mm at one time, with stable dimensions and smooth finish. В то же время, non-standard parts also have advantages for threaded parts with large deformation.

On the left is a straight threaded screw. The head is a grooved straight grain, which is made by turning straight grain drawing bar stock. The thread is made by rolling. Used in injection molding, as an insert to implant plastic parts. As a demonstration of screws for injection molding, our company also provides more other solutions, see Screws for injection molding for details