Vijfassige freestechnologie voor korte gereedschappen

The use of short cutting tools is the main feature of five-axis machining. Short tools will significantly reduce tool deviation, thereby obtaining a good surface quality, avoiding rework, reducing the amount of welding rod used, and shortening the processing time of EDM. When considering five-axis machining, the goals of using five-axis machining molds must be considered:
Use the shortest cutting tool possible to complete the processing of the entire workpiece. It also includes reducing programming, clamping and processing time but can get a more perfect surface quality.

As long as the workpiece cavity is not very deep (relative to the tool diameter), a three-axis tool path (2, 3, 5) is sufficient. If the workpiece cavity is very deep and has very narrow parts, it is not enough to use a pure three-axis tool path to complete the entire finishing. In dit geval, poor surface quality and long processing time ensue. Figuur 1 is the case of a three-axis tool path. Here, the shortest tool must be very long in order to be able to machine all areas of the workpiece in the vertical direction.

3-axis machining path of short tool

Figuur 1, Three-axis machining path

When using a shorter tool, the spindle should be tilted to ensure that the special area of the workpiece can be processed. 3+2 axis machining is usually considered as setting a constant angle to the spindle. Complex workpieces may require many oblique views to cover the entire workpiece, but this will cause tool paths to overlap and increase machining time.
In aanvulling, all the oblique views are difficult to accurately combine, so the workload of manual polishing will increase, en op hetzelfde moment, it will greatly increase the movement in and out, which often leads to surface quality problems and more tool movement.

Figuur 2, 3+2 axis tool pathFinally, programming in this way will interfere with each other and is time-consuming, and the sum of all views often cannot cover the entire geometry. Figuur 2 demonstrates four workpiece views, but there is still an area in the center of the workpiece that cannot be covered. This area still needs an additional oblique view.

3+2 axis short tool machining path

Figuur 3, 5-axis tool path

5-axis short tool machining path

Om de tekortkomingen van 3+2 as bewerking, gelijktijdige bewerking met vijf assen kan een betere keuze zijn, Om nog maar te zwijgen van het feit dat sommige vijfassige werktuigmachines ook enkele functies hebben die speciaal zijn ontworpen voor de matrijzenindustrie. Vijfassige koppelingsbewerking kan drie lineaire assen en twee roterende assen coördineren, zodat ze tegelijkertijd bewegen, die alle problemen van 3-assige en oplost 3+2 as bewerking. Het hulpmiddel kan zeer kort zijn, er is geen sprake van overlap van standpunten, de mogelijkheid om het verwerkingsgebied te missen is kleiner, en de verwerking kan continu worden uitgevoerd zonder extra import en export (zie figuur 3).