CNC 선반 터닝 복잡한 형상 부품 그루브

On the basis of automatic lathes, our factory is newly equipped with computer numerical control lathes. Due to the high commissioning time and commissioning cost of a single automatic lathe turning process, there are also certain requirements for the number of orders. The configuration of CNC machine tools solves the user's requirements for multiple varieties, 복잡한 모양, 그리고 높은 정밀도, and effectively improves the machining capabilities of our factory. Below are some representative products processed by our company for users.
The maximum machining outer diameter of the spindle can reach 80MM under the condition of continuous feeding, and the maximum rotation diameter can be up to 360MM under the condition of separate processing with a chuck; The minimum size of processing is not limited. The materials of the products are mainly copper, 철, 알류미늄, stainless steel and titanium alloy. Other plastic and acrylic materials can also be processed. It can also be processed according to the drawings provided by the user.

긴 치수 CNC 선반 가공 부품	더 긴 크기의 컴퓨터 선반 가공 부품 이것은 긴 CNC 가공 부품입니다.. 제품이 너무 크기 때문에, 부분 클로즈업만 촬영되었습니다, 그리고 첨부된 전체 사진은 확대해봤습니다. 왼쪽 그림의 사양 25MM*300MM 양단 가공, 중간 연마 왼쪽 제품재료: 알류미늄 가공 가능한 재료: 알류미늄, 철, 스테인레스 스틸, 구리, 등.
스테인레스 스틸 래치 핀	A stainless steel Latch pin processed by our company, attached with a large picture. (Knurled section) Melt into the plastic part, and the exposed tip is small flat for positioning. 처리 기능: tip, deep hole
Large-size stainless steel turning parts	더 큰 CNC 선반 선반 부품의 예. 사진의 왼쪽 부분은 더 큰 스테인레스 스틸 회전 부분입니다. 재질 SUS304, 육각형 반대편 H (키) 45mm, 실을 돌리는 것, 회전 내벽, 2레벨 관통 구멍. 모양과 설치가 단순하지만, 선삭 가공량이 크다. 큰 그림 첨부합니다.
Thin and long shaft machining	CNC lathe machining of thin and long shafts As the product is long, the left picture is only a partial picture of the product, click on the picture to see the complete product picture 재료: 알류미늄 Size: Maximum outer circle 12MM, total length 150MM Processing characteristics: thin and long axis processing
Examples of small aluminum turning parts	An example of a small aluminum turning part. The outer diameter is 12mm and the length is 15mm, two-level flat hole, side hole screw M3. 처리 기능: The CNC power tool head can be drilled and tapped on the side of the product. 큰 그림 첨부합니다.