금속재료의 다이캐스팅 특성

다이캐스팅의 주요 합금 재료는 주석입니다., 선두, 아연, 알류미늄, 마그네슘, 구리, 스테인레스 스틸, 등. 아연 및 알루미늄 합금이 가장 널리 사용됩니다., 그 다음에는 마그네슘과 구리 합금이 있습니다.. 현재, 아연, 알루미늄 및 마그네슘 합금은 주로 전자 산업에 사용됩니다..

모터 케이싱 주조

Die-cast zinc alloy
The molten state of zinc alloy is very fluid, with a low melting point of only 365 도. Various post-processing treatments such as electroplating can be performed, so it is widely used. It was also used a lot in the mobile phone industry before, but because of its large specific weight and poor corrosion resistance, it was gradually eliminated by aluminum alloys. The most used is the bathroom industry. Commonly used are 2, 3, 4, 5, 7 아연 합금, and the most widely used is 3 아연 합금.
Die-cast aluminum alloy
Aluminum alloy has low density, but relatively high strength, close to or surpassing high-quality steel, good plasticity, and can be processed into various profiles. It has excellent electrical conductivity, thermal conductivity and corrosion resistance, and is widely used in industry, second only to steel. The specific weight of aluminum alloy is only about 1/3 of that of iron, so it is very important in all walks of life, especially in the lightweight process of aircraft, ships, 자동차, and electronic instruments.
Commonly used are Al-Si-Cu system, common ADC12 (A383), ADC10 (A380) 등등. 게다가, there are Al-Si series, Al-Si-Mg series, and Al-Mg series. Also known as aluminum-titanium alloy, it is improved by adding titanium metal to the above-mentioned materials. Adding titanium metal can significantly improve the mechanical properties of the product.
Die-cast magnesium alloy
Magnesium alloys are alloys composed of magnesium-based and other elements. Its characteristics are:
Low density, high specific strength, large specific elastic modulus, good heat dissipation, good shock absorption, higher impact load capacity than aluminum alloy, and good corrosion resistance to organic substances and alkalis. The specific gravity of magnesium is about 2/3 that of aluminum and 1/4 of that of iron. 그러므로, it is widely used in electronic equipment such as mobile phones, communication equipment, 자동차 부품, and medical equipment.
The most widely used are magnesium-aluminum alloys, followed by magnesium-manganese alloys and magnesium-zinc-zirconium alloys. The commonly used grades are AZ91D, AM60B, AM50A, AS41B and so on.
Die casting mold
Die-casting molds must be made of hot work mold steel. Commonly used steels are: H13, 2344, 8407, 8418, SKD61, DAC, FDAC, 등.
Mold structure: (rear mold, front mold) mold base, mold core, guide post, guide sleeve thimble, cylinder, shunt, gate sleeve, 슬라이더, inclined guide post, hydraulic core pulling.
Mold processing equipment: milling machine, CNC 머시닝센터, 와이어 커팅 (slow wire), (mirror) spark machine, grinding machine, lathe, welding repair equipment.