ಟ್ಯಾಗ್ ಆರ್ಕೈವ್ಸ್: ಮಿಲ್ಲಿಂಗ್ ಟೈಟಾನಿಯಂ ಮಿಶ್ರಲೋಹ ಭಾಗಗಳು

Numerical control processing integrates drilling, ಗಿರಣಿ, ತಿರುಗುತ್ತಿದೆ, ನೀರಸ, ರೀಮಿಂಗ್, tapping and other processes into a whole, which requires high technical quality of technicians. A true CNC master should have not only a wealth of theoretical level, but also superb practical experience and practical ability.

Automatic programming of CNC machining
The automatic programming of CNC machining is also called computer-aided programming, ಅದು, most or all of the programming is done by the computer. Such as completing the calculation of coordinate values, compiling part processing procedures, automatically outputting and printing processing procedures and preparing control media.

One hundred years ago, high-speed steel cutting tools began to be used, and the cutting speed for milling ordinary steel was only 25-30m/min. Compared with carbon tool steel and alloy tool steel, the processing at that cutting speed is “high-speed milling”. ಆದ್ದರಿಂದ, “high-speed steel” was named.

The high-speed milling system is a complex dynamic system, which is prone to chatter vibration when machining thin parts. Flutter is a very strong relative vibration between the tool and the workpiece during the milling process. This kind of vibration will destroy the relative correct position of the tool and the workpiece, and reduce the surface processing quality and milling efficiency. For a long time, cutting chatter has been a major research topic in the machinery manufacturing industry and milling processing.

Parts finishing is an algorithm based on curved surfaces. For multi-curved models, the lifting of the milling cutter should be reduced as much as possible. This requires that the generated milling tool path be within the same angular range or require different allowances in the axial and radial directions.

SPDT ತಂತ್ರಜ್ಞಾನದೊಂದಿಗೆ ಅಲ್ಟ್ರಾ-ನಿಖರವಾದ ಕತ್ತರಿಸುವುದು ಪ್ರಾರಂಭವಾಯಿತು, ಇದು ಏರ್ ಬೇರಿಂಗ್ ಸ್ಪಿಂಡಲ್‌ಗಳಿಂದ ಬೆಂಬಲಿತವಾಗಿದೆ, ನ್ಯೂಮ್ಯಾಟಿಕ್ ಸ್ಲೈಡ್ಗಳು, ಹೆಚ್ಚಿನ ಬಿಗಿತ, ಹೆಚ್ಚಿನ ನಿಖರವಾದ ಉಪಕರಣಗಳು, ಪ್ರತಿಕ್ರಿಯೆ ನಿಯಂತ್ರಣ, ಮತ್ತು ನ್ಯಾನೊ ಮಟ್ಟದ ಮೇಲ್ಮೈ ಒರಟುತನವನ್ನು ಪಡೆಯಲು ಪರಿಸರ ತಾಪಮಾನ ನಿಯಂತ್ರಣ. ಡೈಮಂಡ್ ಕಟ್ಟರ್‌ಗಳನ್ನು ಹೆಚ್ಚಾಗಿ ಬಳಸಲಾಗುತ್ತದೆ, ತಾಮ್ರದ ಫ್ಲಾಟ್ ಮತ್ತು ಆಸ್ಫೆರಿಕ್ ಆಪ್ಟಿಕಲ್ ಅಂಶಗಳ ಸಂಸ್ಕರಣೆಯಲ್ಲಿ ವ್ಯಾಪಕವಾಗಿ ಬಳಸಲಾಗುತ್ತದೆ, ಪ್ಲೆಕ್ಸಿಗ್ಲಾಸ್, ಪ್ಲಾಸ್ಟಿಕ್ ಉತ್ಪನ್ನಗಳು (ಉದಾಹರಣೆಗೆ ಕ್ಯಾಮೆರಾ ಪ್ಲಾಸ್ಟಿಕ್ ಮಸೂರಗಳು, ಕಾಂಟ್ಯಾಕ್ಟ್ ಲೆನ್ಸ್ ಮಸೂರಗಳು, ಇತ್ಯಾದಿ), ಸೆರಾಮಿಕ್ಸ್ ಮತ್ತು ಸಂಯೋಜಿತ ವಸ್ತುಗಳು.