OEM 304 ಸ್ಟೇನ್ಲೆಸ್ ಟರ್ನಿಂಗ್ ಪ್ರಿಸಿಷನ್ ಕಾಂಪೊನೆಂಟ್

ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ ತಿರುವು ಭಾಗಗಳು
ನಮ್ಮ ಕಂಪನಿ SUS303 ಅನ್ನು ಉತ್ಪಾದಿಸುತ್ತದೆ, 304, SUS400 ಸರಣಿ, 316ಎಫ್ ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ ನಿಖರವಾದ ತಿರುವು ಭಾಗಗಳು ಮತ್ತು ವಿವಿಧ ವಿಶೇಷಣಗಳು ಮತ್ತು ಗಾತ್ರಗಳ ಲ್ಯಾಥ್ ಭಾಗಗಳು.
ಎಡಭಾಗದಲ್ಲಿರುವ ಉತ್ಪನ್ನವು ನಮ್ಮ ಕಂಪನಿಯಿಂದ ತಯಾರಿಸಲ್ಪಟ್ಟ ಸ್ಟೇನ್‌ಲೆಸ್ ಸ್ಟೀಲ್ ಟರ್ನಿಂಗ್ ಭಾಗವಾಗಿದೆ:
ಥ್ರೆಡ್ಗಳೊಂದಿಗೆ ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ ತಿರುವು ಭಾಗಗಳು, ಹಂತಗಳು ಮತ್ತು ಗಿರಣಿ ಮಾಡಿದ ಷಡ್ಭುಜೀಯ ಅಂಚುಗಳನ್ನು SUS303 ಸ್ಟೇನ್‌ಲೆಸ್ ಸ್ಟೀಲ್‌ನಿಂದ ಮಾಡಲಾಗಿದೆ, ಥ್ರೆಡ್ ವಿವರಣೆ M4,
ಗರಿಷ್ಠ ಹೊರಗಿನ ವ್ಯಾಸ (ಅಂದರೆ ಅದರ ತಲೆಯ ವ್ಯಾಸ): 10ಮಿಮೀ, ಒಟ್ಟು ಉದ್ದ 38 ಮಿಮೀ
ವೈಶಿಷ್ಟ್ಯಗಳು: ಅಕ್ಷೀಯ ಮುಖ ಮಿಲ್ಲಿಂಗ್ ಷಡ್ಭುಜೀಯ, ದೊಡ್ಡ ತಿರುವು ಪರಿಮಾಣ, ಹೆಚ್ಚಿನ ನಿಖರತೆ, ಅರೆ-ಸಿದ್ಧಪಡಿಸಿದ ಉತ್ಪನ್ನಗಳನ್ನು ಸ್ವಯಂಚಾಲಿತ ಲ್ಯಾಥ್ ಮೂಲಕ ಪೂರ್ಣಗೊಳಿಸಲಾಗುತ್ತದೆ + ಹೈಡ್ರಾಲಿಕ್ ಮಿಲ್ಲಿಂಗ್ ಯಂತ್ರ ಮಿಲ್ಲಿಂಗ್ ಷಡ್ಭುಜೀಯ ಮುಖ + ಥ್ರೆಡ್ ರೋಲಿಂಗ್ ಯಂತ್ರ ರೋಲಿಂಗ್. ಈ ತಿರುವು ಭಾಗವನ್ನು ಜೋಡಿಸಲು ಮತ್ತು ಸರಿಹೊಂದಿಸಲು ಪ್ರಸಿದ್ಧ ವಿದ್ಯುತ್ ಉಪಕರಣದಲ್ಲಿ ಬಳಸಲಾಗುತ್ತದೆ.
Our turning parts are widely used in all walks of life. The following part of this page will show several representative examples of products processed by our lathes.

Two stainless steel precision turning parts with internal threads, various automatic lathe parts produced with SUS303 as the material Main process: ತಿರುಗುತ್ತಿದೆ, embossing, ಗಿರಣಿ, rolling (or turning), ಕೊರೆಯುವುದು, ಟ್ಯಾಪಿಂಗ್, ಇತ್ಯಾದಿ. The smaller product specification in the left picture is M4*5*16 (ಎಳೆ * maximum outer diameter * total length, ಘಟಕ: MM, the same below), which is a straight-grained internal thread product. Great product specifications for the M5 * 12 * 16, one end of the milling bilateral

Stainless steel precision turned parts with pressure teeth
This is a stainless steel shaft pin developed and produced for an internationally renowned communications company. Three steps, straight lines on the middle shaft surface, 0.8mm pitch, can be inserted firmly into the hole and prevent loosening/rotation. ವೈಶಿಷ್ಟ್ಯಗಳು: Steps have a large amount of turning at one time / straight embossing and clear and symmetrical tooth patterns, which are a big test for technology and equipment

This is a special threaded part (also a standard part abroad): SHOULDER SCREW, shoulder screw or plug screw or contour screw. The shaft surface accuracy requirements are often relatively high, the shaft surface diameter tolerance is generally 0.01MM, and the surface roughness is 0.8um.
ವಸ್ತು: SUS303
Process: automatic car molding - hexagonal hole punch - Rolling.
ವೈಶಿಷ್ಟ್ಯಗಳು: High surface accuracy / fills the gap of domestic stainless steel screws.
See details of stainless steel shoulder bolts

Comparison of large and small stainless steel turning parts, click on the left picture to see the comparison of these two large and small turning parts
The dimensions of these two threaded turning parts are in sharp contrast. To show the range of stainless steel parts that can be produced and processed by our company, the threads can be processed from M1.6 to M16, and the smallest large circle size from φ2.0 to φ32.
Left picture: The threaded part specification of the small-sized stainless steel turning parts is M2*5 (head diameter)*20 (total length)
The large-sized stainless steel turning parts in the picture on the left are M12*18*78, and its thread is turned by a lathe (click on the left picture to see its sharp thread from its enlarged picture) instead of simple gear hobbing. The upper part is knurled and milled on both sides, the outer diameter of the knurling is 12MM, and the length is 28MM. The rolling embossing pattern on a large area of stainless steel is naturally not rolled out on the machine table. We use customized knurling wheels to press out the patterns on the thread rolling machine, the principle is similar to thread rolling.
The large stainless steel turning part on the right side of the left picture is as exquisite as a handicraft. If your monitor has a resolution greater than 1024*768, you can enjoy its full-size pictures. ಖಂಡಿತವಾಗಿ, due to well-known reasons, we put the logo on it. Click to look at: HD picture of stainless steel turning parts

Milling with internal threads and external threads of stainless steel turning member
The picture on the left is a multi-step shaft with a threaded part with a double-sided milling on one end, an M4 external thread on one end, and an M4 internal thread on the other end.