ಅಚ್ಚುಗಳನ್ನು ತಯಾರಿಸಲು ಹೆಚ್ಚಿನ ವೇಗದ 5-ಅಕ್ಷದ ಯಂತ್ರ

ಇಂದಿನ ದಿನಗಳಲ್ಲಿ, ಆಟೋಮೊಬೈಲ್ ಅಚ್ಚುಗಳು ಅಚ್ಚು ಮೇಲ್ಮೈ ಗುಣಮಟ್ಟ ಮತ್ತು ಕತ್ತರಿಸುವ ವೇಗಕ್ಕೆ ಹೆಚ್ಚಿನ ಮತ್ತು ಹೆಚ್ಚಿನ ಅವಶ್ಯಕತೆಗಳನ್ನು ಹೊಂದಿವೆ. ಮೂರು-ಆಯಾಮದ ವಕ್ರಾಕೃತಿಗಳೊಂದಿಗೆ ಸಮತಲವನ್ನು ಪ್ರಕ್ರಿಯೆಗೊಳಿಸಲು ಐದು-ಅಕ್ಷದ CNC ವ್ಯವಸ್ಥೆಯನ್ನು ಬಳಸಿದಾಗ ಅತ್ಯುತ್ತಮ ಮಿಲ್ಲಿಂಗ್ ಸ್ಥಿತಿಯನ್ನು ಸಾಧಿಸಬಹುದು. ವಿವಿಧ ಜ್ಯಾಮಿತೀಯ ಆಕಾರಗಳನ್ನು ಪ್ರಕ್ರಿಯೆಗೊಳಿಸಲು ಯಂತ್ರ ಉಪಕರಣದ ಯಂತ್ರ ಪ್ರದೇಶದಲ್ಲಿ ಯಾವುದೇ ಸ್ಥಾನದಲ್ಲಿ ಉಪಕರಣದ ಅಕ್ಷದ ಸೆಟ್ಟಿಂಗ್ ಕೋನವನ್ನು ಬದಲಾಯಿಸಬಹುದು.

3-axis machining center for processing deep cavity molds

3 axis machining center for deep cavity mold processing

The design of auto parts is mainly completed by CAD system, reverse engineering and various tests. The machining program for the complex surface of the mold comes from the CAM software, but how to ensure the accuracy of design and machining depends on CNC machining. The following discusses the relationship between the application of five-axis CNC system and mold quality in mold processing.

5-axis machining center is processing deep and steep cavities

Comparative application of 3-axis machining and 5-axis machining molds
When the 3-axis machining center is processing deep cavity molds, it can only be achieved by lengthening the handle and cutting tools (ಚಿತ್ರ ನೋಡಿ 1). ಆದಾಗ್ಯೂ, when the 5-axis machining center is processing deeper and steeper cavities, the additional rotation and swing of the workpiece or the spindle head can create the best process conditions for processing and appropriately shorten the tool length. It can avoid the collision of the tool and the tool holder with the cavity wall, reduce the jitter of the tool and the risk of tool damage during processing, thereby improving the surface quality of the mold, processing efficiency and tool life (ಚಿತ್ರ ನೋಡಿ 2).

3-axis machining center processes the side wall of a mold

When a 3-axis machining center is used to process the side wall of a mold, the depth of the side wall determines the length of the selected tool, and the length of the tool must be greater than the depth of the side wall. As the tool length increases, the strength of the tool will decrease. If the tool length exceeds 3 times the diameter, the tool will give way, and it is difficult to ensure the quality of the workpiece (ಚಿತ್ರ ನೋಡಿ 3). The five-axis machining center is used to process the side wall of the mold workpiece, and the workpiece or the spindle can be swung to make the tool perpendicular to the side wall of the workpiece. Then use a plane milling cutter to mill the side wall, which can ensure the quality of the workpiece and extend the tool life (ಚಿತ್ರ ನೋಡಿ 4).

Set ball cutter fine milling

When using a 3-axis machining center to process a relatively flat surface, use a ball cutter to finish milling to get a better surface quality, so the tool path should be increased. But everyone knows that the linear velocity of the tool center of the ball-end knife is close to zero, so the tool is damaged greatly during the machining process, which shortens the tool life and deteriorates the surface quality (ಚಿತ್ರ ನೋಡಿ 5). When using a five-axis machining center to process a relatively flat surface, in order to increase the relative linear velocity between the ball-end tool and the workpiece, ಚಿತ್ರದಲ್ಲಿ ತೋರಿಸಿರುವಂತೆ 4, the tool and the workpiece are processed at a certain angle. The relative linear velocity between the tool and the workpiece increase ball, this would both improve the tool life, but also improve the surface quality of the workpiece (see FIG. 6).

ಐದು-ಅಕ್ಷದ ಯಂತ್ರ ಕೇಂದ್ರದೊಂದಿಗೆ ಇಳಿಜಾರಾದ ಸಮತಲದಲ್ಲಿ ಸಾಮಾನ್ಯ ರಂಧ್ರವನ್ನು ಯಂತ್ರ ಮಾಡುವುದು

ಜೊತೆಗೆ, when the 5-axis machining center is used to process the normal hole on the inclined surface. In the swing head type machine tool, the processing action is to place the spindle in the direction perpendicular to the inclined surface of the workpiece through the swing head and then position it to the position of the hole. Hole machining requires at least two linear axis interpolation motions to process the oblique hole, which greatly reduces the accuracy of the hole. When using a pendulum-type five-axis machining center for oblique face machining. The action is to place the inclined surface of the workpiece in the direction perpendicular to the spindle through the swing table, and only a linear axis movement of the spindle is required for hole processing. This greatly improves the accuracy of the hole (ಚಿತ್ರ ನೋಡಿ 7).

Other advantages of the five-axis machining system
ಇಂದಿನ ದಿನಗಳಲ್ಲಿ, ಆಟೋಮೊಬೈಲ್ ಅಚ್ಚುಗಳು ಅಚ್ಚು ಮೇಲ್ಮೈ ಗುಣಮಟ್ಟ ಮತ್ತು ಕತ್ತರಿಸುವ ವೇಗಕ್ಕೆ ಹೆಚ್ಚಿನ ಮತ್ತು ಹೆಚ್ಚಿನ ಅವಶ್ಯಕತೆಗಳನ್ನು ಹೊಂದಿವೆ. The best cutting state can be obtained when the five-axis CNC system is used to process a plane with three-dimensional curves. ವಿವಿಧ ಜ್ಯಾಮಿತೀಯ ಆಕಾರಗಳನ್ನು ಪ್ರಕ್ರಿಯೆಗೊಳಿಸಲು ಯಂತ್ರ ಉಪಕರಣದ ಯಂತ್ರ ಪ್ರದೇಶದಲ್ಲಿ ಯಾವುದೇ ಸ್ಥಾನದಲ್ಲಿ ಉಪಕರಣದ ಅಕ್ಷದ ಸೆಟ್ಟಿಂಗ್ ಕೋನವನ್ನು ಬದಲಾಯಿಸಬಹುದು. Irregular curved surfaces are processed by three-axis, and the direction of the cutting tool remains unchanged during the movement along the entire cutting path, so that the cutting state of the tool tip cannot always be perfect in all parts of the entire curved surface.

For deep grooves or curved surfaces that frequently change curvature, a five-axis CNC system is required for processing. The direction of the tool or the position of the worktable can be changed, and the cutting tool can always maintain the best cutting state. In the process of moving along the entire processing path, the tool direction can be optimized, and the tool moves in a straight line, so that all parts of the entire curved surface are perfect. If you want to mill a straight line with no direction change, the tool post can draw a straight line. If the direction changes at the same time, the tip of the tool draws a curve. If the tool tip can draw the required straight line when the direction is changed, this curve must be compensated, which is a crucial point in five-axis machining. In the case that the control system does not consider the tool length, the tool rotates around the center of the shaft. The tip of the knife will move out of its place and will not be fixed. If a five-axis control function is added to the control system, the control system only changes the direction of the tool, and the position of the tool tip remains unchanged. The necessary compensation movements on the X, ವೈ, and Z axes have been automatically calculated to ensure the accuracy of processing.