ಮಾಸ್ಕ್ ಯಂತ್ರದ ಉಬ್ಬು ರೋಲರ್ ಟರ್ನಿಂಗ್ ಮತ್ತು ಮಿಲ್ಲಿಂಗ್ ಸಂಸ್ಕರಣೆ

KN95 Mask Machine Roller, Stamping Shaft and Press Wheel
1. The embossing roller cart of the mask machine is made of seamless steel pipe, and then processed by CNC. Processing is divided into turning, milling and welding.

Mask machine embossing wheel

2. Turning and milling: turning and processing the joint surface of the mating parts of the roller body, end plate and shaft head. Rough and fine turning each part of the embossing shaft roller body to the size required by the drawing, then set the center frame, turn the end face, and drill.

3. Welding of the inner tube of the embossing roller: correct the coaxiality between the shaft at both ends and the inner sleeve, and only weld the inner end plate on the shaft head. Put the inner sleeve into the roller body, and weld the mating junction of the inner end plate and the roller body.

4. Install the outer end plate on the shaft at both ends, and weld the junction of the outer end plate and the joint surface with the roller body. The next step is annealing and drilling. The roll blank is annealed to eliminate internal stress; One end of the steel roller is flattened, and a standard center hole is drilled. Then there is the embossing pattern of the engraving roller. The embossing roller can be carved with patterns on the surface of the roller according to the pattern and pattern requirements of the customer. With high-tech laser machines and engraving equipment, the craftsmanship is exquisite and the lines are clearly visible.

5. ಅಂತಿಮವಾಗಿ, chrome plating and verification are required. The chrome plating needs to be determined according to the purpose, and the verification is mainly to ensure the balance and stability of the steel bars.

Mask machine folding wheel roller

ಸಾಮಾನ್ಯ CNC ಲ್ಯಾಥ್‌ಗಳೊಂದಿಗೆ ಹೋಲಿಸಿದರೆ, the turret tool post of CNC turning center is equipped with power tools that can rotate milling cutters, ಡ್ರಿಲ್ಗಳು, and taps. ಅದೇ ಸಮಯದಲ್ಲಿ, the machine tool spindle also has the C-axis function that can be accurately indexed according to the CNC program and interpolated with the X-axis or (ಮತ್ತು) Z-axis. This kind of 3-axis (X, Z, ಸಿ) control turning center can perform turning, ಗಿರಣಿ, ಕೊರೆಯುವುದು, ನೀರಸ, and tapping on the rollers of the mask machine in one clamping. ಇಲ್ಲಿಯವರೆಗೆ, it is still the most used face mask machine roller workpiece composite machining machine tool in industrial production.

ಆದಾಗ್ಯೂ, ಏಕ-ಸ್ಪಿಂಡಲ್ ಟರ್ನಿಂಗ್ ಸೆಂಟರ್ ಪ್ರಕ್ರಿಯೆಯ ವ್ಯಾಪ್ತಿಯನ್ನು ಹೇಗೆ ವಿಸ್ತರಿಸುತ್ತದೆ ಎಂಬುದು ಮುಖ್ಯವಲ್ಲ, it still cannot solve the problem of the back side secondary processing (ie, the processing of the workpiece clamping end) of the mask machine roller under one clamping, so it must be completed with a dual-spindle turning center. The two spindles of the dual-spindle turning center are mostly arranged oppositely on the same axis, so that after the main end of the rotating body is processed, ಕ್ಲ್ಯಾಂಪ್ ಮಾಡುವ ಅಂತ್ಯವನ್ನು ಪ್ರಕ್ರಿಯೆಗೊಳಿಸಲು ಎರಡನೇ ಸ್ಪಿಂಡಲ್ ಸ್ವಯಂಚಾಲಿತವಾಗಿ ಸ್ಪಿಂಡಲ್‌ನಿಂದ ವರ್ಕ್‌ಪೀಸ್ ಅನ್ನು ಎತ್ತಿಕೊಳ್ಳುತ್ತದೆ.

ಕ್ಲ್ಯಾಂಪ್ ಮಾಡುವ ಅಂತ್ಯದ ಯಂತ್ರ ಕಾರ್ಯಗಳು ಸಾಮಾನ್ಯವಾಗಿ ತುಲನಾತ್ಮಕವಾಗಿ ಸರಳವಾಗಿರುವುದರಿಂದ, ಎರಡನೇ ಸ್ಪಿಂಡಲ್ ಅನ್ನು ಸಾಮಾನ್ಯವಾಗಿ ಉಪ ಸ್ಪಿಂಡಲ್ ಎಂದು ಕರೆಯಲಾಗುತ್ತದೆ, ಮತ್ತು ಅದರ ಶಕ್ತಿ ತುಲನಾತ್ಮಕವಾಗಿ ಚಿಕ್ಕದಾಗಿದೆ. ಡಬಲ್-ಸ್ಪಿಂಡಲ್ ಟರ್ನಿಂಗ್ ಸೆಂಟರ್ ಅನ್ನು ಒಂದು ಟೂಲ್ ಪೋಸ್ಟ್‌ನೊಂದಿಗೆ ಅಳವಡಿಸಬಹುದಾಗಿದೆ, ಆದರೆ ಅವುಗಳಲ್ಲಿ ಹೆಚ್ಚಿನವು ಎರಡು ಟೂಲ್ ಪೋಸ್ಟ್‌ಗಳಾಗಿವೆ, in order to improve the processing efficiency and give full play to the potential of the machine tool equipment. The machine is on the same axis above the bed, equipped with a main shaft and a sub-spindle facing each other. ಸಾಮಾನ್ಯವಾಗಿ, the speed of the dual main shafts is 0~4000r/min, ಮತ್ತು ಎರಡನ್ನೂ C ಅಕ್ಷದಿಂದ ನಿಯಂತ್ರಿಸಬಹುದು. The sub-spindle can also move along the axial direction to pick up the workpiece that has been processed on the main shaft at one end. A turret tool holder with about ten tool positions is provided above the main spindle and below the sub-spindle. Each tool position on the turret tool post can be equipped with a power tool with a certain power and a speed of 80～8000r/min. ಮೇಲಿನ ಟೂಲ್ ಪೋಸ್ಟ್ ಅನ್ನು ನಿಯಂತ್ರಿಸಲಾಗುತ್ತದೆ 3 ಅಕ್ಷಗಳು (X1, Y1, Z1), The lower tool post is controlled by 2 ಅಕ್ಷಗಳು (X2, Z2).
The Japanese Okuma TWINSTAR series turning-milling composite CNC machine tools provided by our company have two models: TWIN STAR LT200-M and TWIN STAR LT300-M. Has the following performance characteristics:
• Opposing dual-spindles, the main and sub-spindles have the same power and the same speed, and the upper and lower tool rests have the same power and the same capacity.
• It can do four-axis turning and milling at the same time. The main and sub-spindles can simultaneously transfer and clamp the workpiece without stopping. ಈ ಮಾರ್ಗದಲ್ಲಿ, all the front and back processing from the blank to the finished product can be completed, which greatly shortens the processing cycle of the workpiece and shortens the processing time by about 40%.
• With milling function, the transmission power of the rotary tool spindle is 5.5kW.
• Double tool post, using left and right spindles and upper and lower composite tool posts for machining, which can integrate the machining processes that were previously divided into multiple processes. The use of high-precision linear guides can maintain stable machining accuracy even for long-term continuous machining.