精密銅電気部品旋削加工

左の写真は、雌ねじと雄ねじが付いている銅製の旋削部品を示しています。. 待って, 何かが間違っているようです. . . . . . これは銅ですか?
それは正しい, これは銅の旋削部品です, C3604 早切れ真鍮製, 表面は電気メッキされています, そしてメッキはニッケルメッキです, なのでステンレスのように見えます.
この製品には内ネジと外ネジが両方あります, 雌ネジはM4です, おねじはM6です. 外ねじ付き上部平面フライス加工中, 確認するためのスレッド 100% コンプライアンス.
このような内ねじ、外ねじの製品をどのように旋盤加工するのでしょうか。? このアドレスを参照できます, このページの最初の製品は左の製品の半製品です (粉砕されていない, メッキなし, 銅色):

Another copper air nozzle with turning processing similar to the two products in the previous picture.
The difference is that this kind of gas nozzle has no external thread, it is embedded in the plastic part and fixed by insert. Similar to this kind of inserts generally have internal threads, this product has neither external threads nor internal threads because it is only used as an air nozzle. 例えば, nozzles used in humidifiers
For plastic embedded copper parts with internal threads, please refer to: plastic embedded inlay nut parts

Turned parts of two types of red copper and oxygen-free copper TU.
In addition to the common C3604 or H50 62 series brass, our company also produces red copper turning parts, TU oxygen-free copper turning parts, beryllium copper turning parts and phosphor bronze turning parts.
In the picture on the left, this copper turning part with flower teeth is similar to a rivet nut, but it has no internal threads. The characteristics of red copper are softer, and the tool sticks during turning, and its processing speed is lower than that of brass. しかし, because of its relatively soft hardness, it is very good for pressing flower teeth or rolling threads. Checking the enlarged image shows that the embossing is clear and neat.
The other is a copper threaded turning part with milled edges

Flower tooth red copper turning parts

A copper turning part with threads at both ends. The effect after nickel plating
One end is threaded M4 and the other end is threaded M8, and a side hole ∮4.0MM is drilled on the thread. It is produced with hexagonal bar H13 copper bar, total length is 38MM
Click on the left image to see the enlarged image of this copper turning part on the left

Turned parts with ball heads are made by one-time turning with a forming knife. The outer circle does not need to be polished, but it is as smooth as a mirror. The size of the left picture is H6.35 (maximum outer circle) *7.9 (total length) *M3 (internal thread and hole diameter)
Turned parts for more ball ends