アルミ形材の特徴と主な用途

アルミニウム形材は用途によって分類されます: 建築用アルミニウム形材: 建築用アルミニウムプロファイルには、主にドアや窓用のアルミニウムプロファイルとカーテンウォール用のアルミニウムプロファイルが含まれます。;
ラジエーターのアルミニウムプロファイル: 主に各種パワーエレクトロニクス機器の放熱に使用されます。, LED照明, およびコンピュータデジタル製品.
一般的な工業用アルミニウムプロファイルを指します。:
主に工業生産および製造業で使用されます, 組立ラインのコンベアベルトなど, ホイスト, 接着剤ディスペンサー, 試験装置, 棚, 等, 電子機械産業とクリーンルーム, 等.

Aluminum profiles for auto parts: Mainly used for auto parts, コネクタ, 等. Furniture aluminum profiles are mainly used for furniture decoration frames, table and chair supports, 等.
Solar photovoltaic profiles include: Solar aluminum frame, solar photovoltaic bracket, solar photovoltaic tile fasteners, 等.
Aluminum alloy profiles for rail vehicle structure: Mainly used in rail vehicle body manufacturing. Aluminum alloy profiles have the characteristics of light weight, good formability, 高強度, 耐食性, and recyclability. 近年では, aluminum and aluminum alloys have been widely used in the field of rail vehicles.

Aluminum profile characteristics

Corrosion resistance of aluminum profile
The density of aluminum profile is only 2.7g/cm3, それは約です 1/3 of the density of steel, copper or brass (7.83g/cm3, 8.93g/cm3, それぞれ). In most environmental conditions, including air, water (or salt water), petrochemicals and many chemical systems, aluminum can show excellent corrosion resistance.

Good conductivity
Aluminum profile is often selected because of its excellent electrical conductivity. On the basis of equal weight, the conductivity of aluminum profile is close to 1/2 of copper.


High thermal conductivity
The thermal conductivity of aluminum alloy is about 50-60% of copper. This is beneficial to the manufacture of heat exchangers, evaporators, heating appliances, cooking utensils, and automobile cylinder heads and radiators.

Non-ferromagnetic
Aluminum profiles are non-ferromagnetic, which is an important feature for the electrical and electronic industries. Aluminum profiles are not spontaneously combustible, which is important for applications involving handling or contact with flammable and explosive materials.

Machinability
The workability of the aluminum profile is excellent. In various deformed aluminum alloys and cast aluminum alloys, as well as in the various states that these alloys have after being produced, the machining characteristics change considerably, which requires special machine tools or technology.


Formability
The specific tensile strength, yield strength, ductility and corresponding work hardening rate dominate the change in allowable deformation.

Recyclability
Aluminum has extremely high recyclability, and the characteristics of recycled aluminum are almost indistinguishable from primary aluminum.

Aluminum materials for electrical equipment components
1. Normal decoration use: 1080, 1070, 1050, 6063 boards, shapes
2. Powerful top base and maintenance board: 1100, 5052, 5082 board
3. Maintenance box, capacitor box: 1100, 1050 boards
4. Electric capacitors: 1085, 1070, 1050 foil
5. Variable storage battery: 1100, 1050, 1070, 5052 plate, foil
6. Bearings: 2011, 2017 rods and tubes
7. Loudspeaker frame: 1100, 5052 boards
8. Rotary knob: 2011, 5052, 5056, 6063, 6262 sticks and plates
9. Thank you for closing points: 1100, 5052 boards
10. Zaohan lamp metal heart: 3004 plate
11. Luminous metal heart: 1100 プレート
12. Sheath heater: 1100, 3003, 6063 tubes
13. Conductive tubes: 1050, 3003, 6063 shapes, tubes
14. Semiconductor heat collector: 1050, 6063 plates and shapes
15. TV ground wire: 1100, 3003, 6063 tube
16. TV cabinet: 5052 boards
18.VTR tape guide: 5052, 5056, 6063, 7003 shapes, tubes
19. Magnetic square plate: 5086 プレート
20. Magnetic drum: 2025, 2218, 4032 forged products
21. Radar ground wire, dish antenna: 6061, 6N01, 6063 profiles
22. Motor frame: 1050, 6063 plates and shapes
23. Revolving fold Coil: 1060, 6101 shapes, 2024, 7N01 shapes, 1060, 6101, 6061, 6063 shapes, プレート, tubes
24. Cable coating: 1050 tubes and plates
25. Ventilation fan blades: 1100, 3003, 5052 プレート
26. Electric cooker: 1100, 3003, 3004, 5N01 board
27. Poly cold film: 1100, 1200, 1050, 3003, 7072 board
28. Copier cylinder: 1050, 3003, 6063 tubes

(4) Aluminum profiles for machinery and packaging and unloading containers
1. Close system of optical fine machine
(1) Camera body: 5052, 5056, 6262 tube, rod
(2) Camera camera: 1100, 5N01 board
(3) Component types: 2011, 5056, 6262 rods
(4) Keyboard: 1050, 1100 boards
(5) Gears and top plates: 2014, 2017, 5083 プレート