OEM non standard Piccole parti rotanti elettroniche

Piccoli particolari di tornitura elettronica	La nostra azienda personalizza tutti i tipi di parti di lavorazione di tornio automatico di precisione per vari settori, soprattutto l'industria elettronica. Attualmente, centinaia di prodotti sono stati sviluppati per molte aziende rinomate nel mondo. Ha una ricca esperienza in ricerca e sviluppo. Materiali principali: alluminio, rame, acciaio inossidabile, titanio, lega, acciaio, ferro, acciaio al carbonio, magnesio, plastica, acrilico Oltre ai torni automatici, ci sono apparecchiature ausiliarie: torni da tavolo, macchine perforatrici, fresatrici (macchine per scanalare), macchine per maschiare, macchine per laminazione, eccetera., che può completare più processi di lavorazione di parti di tornio automatico. La sinistra è una tipica parte rotante di un tornio automatico: dado incorporato utilizzato nello stampaggio a iniezione
Non-standard stainless steel screws	Non-standard stainless steel screws, special thread turning parts, eccetera. Our company can also customize. Per esempio, multi-step screws, products that cannot be extruded by cold forging machines. Or products with high dimensional accuracy requirements, as well as threaded parts, viti, eccetera. with complex shapes. Materiale: acciaio inossidabile / rame / free cutting steel / alluminio / acciaio al carbonio. The left is stainless steel turning parts, click the left picture to see more stainless steel turning parts
iso ts16949 factory milled copper parts	Parlando in generale, the inner hole tolerance can reach 0.02MM (if it is stainless steel or free-cutting steel products, it is 0.03). Allo stesso tempo, flat-bottomed holes can be processed by hook cutters, and step holes can be drilled by forming drills (except for eccentric holes). The inner hole roughness can be up to 0.8. We can develop various parts and hardware non-standard turning parts according to customer drawings. Nota: All the products produced by our company are products with a maximum outer diameter of 20MM (the length is not limited) Left is a copper turning part, see more copper turning parts
Centerless grinding of turned parts	Small turning electronic pins. Used in electronic signal connectors and connector pins. Parlando in generale, the tolerance of the outer cylindrical shaft surface can reach 0.01MM (if it is copper, it can reach 0.005MM), e la rugosità superficiale può raggiungere 0.8. Centerless grinding is used for the outer circle, the tolerance can reach 0.001mm, and the surface roughness can reach 0.2um. This is a non-standard turned part that cannot be achieved by cold forging. Tiny machining parts, non-standard turning parts and lathe parts
Oxidation blackening of iron turning parts	Non-standard turning parts: The automatic lathe is used for one-time completion. The spherical accuracy reaches 0.01mm. This is also something that cold piers cannot achieve. The surface of the product can achieve a mirror-like effect (not a polishing effect, but just a turning effect) The left is the effect of iron turning parts after oxidation and blackening. And the products after milling of iron parts