CNC automatic programming method

How many methods are there for NC machining programming?

Automatic programming of CNC machining
The automatic programming of CNC machining is also called computer-aided programming, tuo on, most or all of the programming is done by the computer. Such as completing the calculation of coordinate values, compiling part processing procedures, automatically outputting and printing processing procedures and preparing control media.

Jatka lukemista

Jyrsinkoneen jyrsinsiipipyörän käsittely

Solve the deformation of parts in high-speed milling

The high-speed milling system is a complex dynamic system, which is prone to chatter vibration when machining thin parts. Flutter is a very strong relative vibration between the tool and the workpiece during the milling process. This kind of vibration will destroy the relative correct position of the tool and the workpiece, and reduce the surface processing quality and milling efficiency. For a long time, cutting chatter has been a major research topic in the machinery manufacturing industry and milling processing.

Jatka lukemista

Ultra-precision milling technology

Erittäin tarkat CNC-jyrsintäosat

Ultra-precision cutting started with SPDT technology, which is supported by air bearing spindles, pneumatic slides, korkea jäykkyys, high-precision tools, feedback control, and environmental temperature control to obtain nano-level surface roughness. Diamond cutters are mostly used, which are widely used in the processing of copper flat and aspheric optical elements, plexiglass, plastic products (such as camera plastic lenses, contact lens lenses, jne.), ceramics and composite materials.

Jatka lukemista

Prismaattisten osien CNC-työstö

Prismaattisten osien sorvaus ja jyrsintä

Koneistuskeskus suorittaa useita prosesseja (kääntyminen, jyrsintä, poraus, tylsä, napauttamalla, jne.) ja prismaattisten osien monipuolinen komposiittikäsittely automaattisen työkalunvaihdon ja taulukon indeksoinnin avulla. Käytäntö on osoittanut, että komposiittityöstökeskus on todella hyödyllinen pitkän toimitusajan puutteiden ratkaisemisessa, alhainen resurssien käyttö, enemmän tuotteita prosessissa ja hidas pääoman kierto pienten ja keskisuurten konevalmistajien yrityksissä. Sorvaus ja jyrsintä yhdistetty käsittely on siten saanut yhä yleisempiä käyttökohteita teollisessa tuotannossa.

Jatka lukemista

cnc-jyrsintäosat

Mitä ovat vaikeasti työstettävät materiaalit?

Difficult-to-machine materials are materials with poor turning and milling workability. Performance of this material is greater than or less indicators (HB> 250, σb> 1000 MPa, δ> 30%, αk> 100 MPa, K <41.8 W / mk) one or more, are all difficult to cut materials. It can also be measured by phenomena in the cutting process (cutting force, cutting heat, tool wear and tool durability, processed surface quality and chip control, etc.).

Jatka lukemista

Lääketieteellisen NiTi-muistiseoksen koneistus

Ongelmia vaikeasti työstettävien materiaalien leikkaamisessa

Cutting is roughly divided into turning, jyrsintä, and center-tooth-based cutting (end face cutting of drills and end mills, jne.). The cutting heat of these cutting processes has different effects on the cutting edge. Turning is a continuous cutting, the cutting force on the tip does not change significantly, and the cutting heat continuously acts on the cutting edge; Milling is a kind of intermittent cutting, and the milling force is intermittently acting on the tip of the blade, and vibration will occur during milling. The heat effect on the cutting edge is the heating during cutting and the cooling during non-cutting alternately, and the total amount of heat received is less than during turning.

Jatka lukemista