Servicio de piezas de precisión de torneado CNC

El procesamiento de torno CNC es un método de procesamiento de alta tecnología de piezas de hardware de precisión.. Se pueden procesar varios tipos de materiales.: 316, 304 acero inoxidable, acero carbono, aleación de acero, aleación de aluminio, Aleación de zinc, aleación de titanio, cobre, hierro, el plastico, acrílico, POM, UHWM y otras materias primas. Se puede procesar en una estructura compleja de piezas cuadradas y redondas..

Categoría: Etiqueta:

Turning refers to lathe processing, which is a part of mechanical processing. Lathe processing mainly uses turning tools for precision turning of rotating parts. Lathes are mainly used for machining shafts, discs, sleeves and other rotating or non-rotating parts with a rotating surface. It is the most widely used type of machine tool processing equipment in machinery manufacturing and repair factories.

El procesamiento de torno CNC es un método de procesamiento de alta tecnología de piezas de hardware de precisión.. Se pueden procesar varios tipos de materiales.: 316, 304 acero inoxidable, acero carbono, aleación de acero, aleación de aluminio, Aleación de zinc, aleación de titanio, cobre, hierro, el plastico, acrílico, POM, UHWM y otras materias primas. Se puede procesar en una estructura compleja de piezas cuadradas y redondas..

Technical problems of CNC turning
Turning processing is one of the most widely used in the machine manufacturing industry. The number of lathes is large, the staff is large, the processing range is wide, and the tools and fixtures used are numerous. Por lo tanto, the safety technology of CNC turning processing is particularly important. Its key tasks are as follows:


1. Damage from cutting chips and protective measures. The steel materials of various parts processed on the lathe have good toughness, and the chips produced during turning are full of plastic curl and have sharp edges. During high-speed cutting of steel parts, red hot and long chips are formed, which are very easy to hurt people. Al mismo tiempo, it is often wound on the workpiece, turning tool and tool holder. Por lo tanto, iron hooks should be used to clean or pull out in time during work, and stop to clean when necessary, but never remove or pull off by hand. In order to prevent chip damage, chip breaking, chip flow control measures and various protective baffles are often taken. The chip breaking measure is to grind chip breakers or steps on the turning tool; Use appropriate chip breakers and mechanical clamping tools.


2, Clamping of the workpiece.
In the process of turning, there are many accidents caused by improper clamping of the workpiece: such as damage to the machine tool, broken or broken tool, and the workpiece falling or flying out of the accident. Por lo tanto, in order to ensure the safe production of turning processing, special attention must be paid when clamping the workpiece. Choose suitable fixtures for parts of different sizes and shapes. Regardless of the three-jaw, four-jaw chuck or special fixture and the main shaft connection must be stable and reliable. The workpiece should be clamped and clamped, and the sleeve can be used for clamping large workpieces. Ensure that the workpiece does not shift, fall off, or throw out when the workpiece is rotated at high speed and subjected to cutting force. Si necesario, use top clamps, center frames, etc.. to enhance clamping. Remove the handle immediately after the card is tightened.

3. Safe operation of lathe.
Before working, check the machine tool thoroughly and confirm it is good before use. The clamping of the workpiece and the tool ensures the correct position, firmness and reliability. Durante el proceso de mecanizado, the equipment must be stopped when changing tools, loading and unloading workpieces, and measuring workpieces. Do not touch the workpiece or wipe it with cotton silk when rotating. It is necessary to select the cutting speed, feed rate and cutting depth appropriately, and no overload processing is allowed. Workpieces, fixtures and other sundries must not be placed on the top of the lathe, the tool rest, and the bed. When using a file, move the turning tool to a safe position, with your right hand in front and your left hand in the back to prevent the sleeves of your clothes from getting caught. The machine tool must have a dedicated person responsible for use and maintenance, and other personnel must not use it.

precision brass spare parts

precision brass spare parts

Torno de precisión para procesamiento de acero inoxidable.

Torno de precisión para procesamiento de acero inoxidable.

precision aluminium cnc turning

precision aluminium cnc turning

Chip breaker for lathe chips

Chip breaker for lathe chips

Contáctenos

Esperando tu email, le responderemos dentro de 12 horas con la valiosa información que necesitabas.

PRODUCTOS RELACIONADOS

Solicitar presupuesto

Rellena nuestro formulario de solicitud de presupuesto y responderemos a tu mensaje lo antes posible!


Warning: file(/www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin_data/keywords_reserved.txt): failed to open stream: No such file or directory in /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin.cls.php on line 141

Warning: file(/www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin_data/keywords_before.txt): failed to open stream: No such file or directory in /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin.cls.php on line 142

Warning: file(/www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin_data/keywords_after.txt): failed to open stream: No such file or directory in /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin.cls.php on line 143

Warning: file(/www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin_data/operators.txt): failed to open stream: No such file or directory in /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin.cls.php on line 144

Warning: file(/www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin_data/operators_before.txt): failed to open stream: No such file or directory in /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin.cls.php on line 145

Warning: file(/www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin_data/operators_after.txt): failed to open stream: No such file or directory in /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin.cls.php on line 146

Fatal error: Uncaught TypeError: Argument 1 passed to LiteSpeed\Lib\JSMin::getOperatorsForRegex() must be of the type array, bool given, called in /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin.cls.php on line 374 and defined in /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin.cls.php:746 Stack trace: #0 /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin.cls.php(374): LiteSpeed\Lib\JSMin->getOperatorsForRegex() #1 /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin.cls.php(180): LiteSpeed\Lib\JSMin->extractRegex() #2 /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin.cls.php(160): LiteSpeed\Lib\JSMin->min() #3 /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/src/optimizer.cls.php(301): LiteSpeed\Lib\JSMin::minify() #4 /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/src/optimize.cls.php(985): LiteSpeed\Optimizer::minify_js() #5 /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache in /www/wwwroot/cncpartss.com/wp-content/plugins/litespeed-cache/lib/jsmin.cls.php on line 746