Mecanizado CNC Fabricante de piezas de hardware

CNC machining hardware products is to process raw materials
(acero inoxidable, cobre, aluminio, hierro) into various parts using lathes,
fresadoras, máquinas perforadoras, polishing and other machinery according to
customer drawings or samples. Como: tornillos, the motor shaft,
the model car parts, fishing equipment parts, aluminum speaker chamber, mobile
power shell.

Process of machining hardware products
The hardware processing process is to order materials
according to the production needs of the parts. After the cutting material is
good, algunas partes pequeñas, como piezas pequeñas, Puede producirse mediante punzonado y
luego corte de gong o procesamiento CNC. Esto es mucho en la producción de gafas.
accesorios y autopartes. Y para hacer un contenedor: después de cortar el
material, punzonado y soldadura, luego lijar y rociar, y luego ensamblar
Los accesorios antes del envío.. Para pequeños accesorios de hardware, mucho
tratamiento superficial después del pulido, Se requiere galvanoplastia o pulverización de aceite..
Luego soldar o atornillar el embalaje y envío del conjunto.

pasos de operación de productos de hardware de mecanizado
1. Antes de ingresar al puesto de trabajo, Todos los empleados comprueban si sus
la ropa cumple con los requisitos laborales. Zapatillas, tacones altos, y ropa que
Afectar la seguridad no están permitidos.. Aquellos con cabello largo deben usar casco..
Mantener la postura correcta durante el trabajo y tener suficiente energía para afrontarlo.
con el trabajo. Si descubres que no te encuentras bien, deberías dejar el trabajo
inmediatamente e informar al líder. Debes concentrar tus pensamientos durante
El funcionamiento y el ruido están estrictamente prohibidos.. Para cooperar unos con otros,
the operator should not operate in a state of irritability and fatigue, so as
to avoid accidents and ensure safe operation.

2. Before mechanical work, check whether the moving part is filled with
lubricating oil, then start and check whether the clutch and brake are normal,
and run the machine idling for 1-3 minutos. Operation is strictly prohibited
when the machine is malfunctioning.

3. Turn off the power first when changing the mold, and then start to install
and debug the mold after the press movement department stops running. After
installation and adjustment, move the flywheel by hand to test punch twice to
check whether the upper and lower molds are symmetrical and reasonable. Whether
the screws are firm and whether the blank holder is in a reasonable position.

4. You must wait for all other personnel to leave the machine working area and
remove the sundries on the workbench before starting the power supply to start
the machine.

5. After the machine is started, one person transports materials and operates
the machine. Others are not allowed to press the power button or step on the
foot switch board, let alone put their hands in the working area of the machine
or touch the moving parts of the machine with their hands. When the machine is
working, it is forbidden to reach into the working area of the slider, and it
is strictly forbidden to pick and place the workpiece by hand. Standard tools
must be used when picking and placing the workpiece in the die. If abnormal
sound or malfunction of the machine is found, turn off the power switch for
inspection immediately.

6. When leaving get off work, turn off the idle power and arrange the finished
products, side materials and sundries on the job to ensure a clean and safe
working environment.

Classification of Finished Hardware Products
The subdivision of hardware surface finishing can be divided into: Hardware
painting processing, galvanoplastia, surface polishing processing, hardware
anti-corrosion processing, etc..

Surface processing of hardware parts:
1. Painting processing: When the hardware factory produces large hardware
products, spray painting is used. Avoid rusting of hardware parts by spray
cuadro, such as daily necessities, electrical appliances, handicrafts, etc..

2. Electroplating:
Electroplating is also the most common processing technology for hardware
processing. The surface of the hardware is electroplated through modern
technology to ensure that the product does not become mildew and rust under
long-term use. Common electroplating processing includes: tornillos, stamping parts,
batteries, car parts, small accessories, etc..

3. Surface polishing of hardware parts:
Surface polishing is generally used for a long time in daily necessities.
Through the surface burr treatment of hardware products such as:
We produce a comb. The comb is a hardware made by stamping, so the corners of
the stamped comb are very sharp. We need to polish the sharp corners into a
smooth face, so that it will not cause harm to the human body during use.