Ikke-standard OEM Små elektroniske drejedele

Vores virksomhed tilpasser alle former for præcisionsautomatiske drejebænkebehandlingsdele til forskellige industrier, især elektronikindustrien. På nuværende tidspunkt, hundredvis af produkter er udviklet for mange kendte virksomheder i verden. Har stor erfaring inden for forskning og udvikling.
Hovedmaterialer: aluminium, kobber, rustfrit stål, titanium, legering, stål, jern, kulstofstål, magnesium, plast, akryl
Ud over automatiske drejebænke, der er hjælpeudstyr: desktop drejebænke, boremaskiner, fræsemaskiner (rillemaskiner), tappemaskiner, rullemaskiner, etc., som kan fuldføre flere processer med automatisk drejebænkbehandling af dele.
Venstre er en typisk drejedel af en automatisk drejebænk: indlejret møtrik brugt i sprøjtestøbning

Ikke-standard skruer i rustfrit stål, special thread turning parts, etc.
Our company can also customize. For eksempel, multi-step screws, products that cannot be extruded by cold forging machines. Or products with high dimensional accuracy requirements, as well as threaded parts, skruer, etc. with complex shapes.
Materiale: rustfrit stål / kobber / free cutting steel / aluminium / kulstofstål.
The left is stainless steel turning parts, click the left picture to see more stainless steel turning parts

Generelt sagt, the inner hole tolerance can reach 0.02MM (if it is stainless steel or free-cutting steel products, it is 0.03). På samme tid, flat-bottomed holes can be processed by hook cutters, and step holes can be drilled by forming drills (except for eccentric holes). The inner hole roughness can be up to 0.8.
We can develop various parts and hardware non-standard turning parts according to customer drawings.
Note: All the products produced by our company are products with a maximum outer diameter of 20MM (the length is not limited)
Left is a copper turning part, see more copper turning parts

Small turning electronic pins. Used in electronic signal connectors and connector pins.
Generelt sagt, the tolerance of the outer cylindrical shaft surface can reach 0.01MM (if it is copper, it can reach 0.005MM), og overfladeruheden kan nå 0.8. Centerless grinding is used for the outer circle, the tolerance can reach 0.001mm, and the surface roughness can reach 0.2um. This is a non-standard turned part that cannot be achieved by cold forging. Tiny machining parts, non-standard turning parts and lathe parts

Non-standard turning parts:
The automatic lathe is used for one-time completion. The spherical accuracy reaches 0.01mm. This is also something that cold piers cannot achieve. The surface of the product can achieve a mirror-like effect (not a polishing effect, but just a turning effect)
The left is the effect of iron turning parts after oxidation and blackening. And the products after milling of iron parts