CNC soustružení dílů elektronických cigaret

Příslušenství k elektronické cigaretě karetní cigarety, C54, CBD atomizér, pouzdro elektronické cigarety z hliníku, atd. Přesné CNC obrábění: slitina hliníku, PROHLÉDNĚTE, PPSU,PC, břišní svaly, PP, PE, PEI, POM
Trup elektronických cigaret obecně obsahuje kovový plastový kompozitní výlisek, Dvoubarevné vstřikování z měkké pryže TPU nebo TPE, a lisování ze silikonové pryže. Zvláštní ochrana bude provedena na krytu bateriového prostoru a rozhraní a dalších elektrických částech, aby bylo dosaženo “tři důkazy” efekt voděodolnosti, prachotěsný, a odolný proti pádu.

Obrábění atomizéru pro elektronickou cigaretu

Engineering plastics support the skeleton
Anyone who has used e-cigarettes knows that e-cigarettes are mainly composed of a cigarette stick, an atomizer, and a mouthpiece.

Atomizer is the core component of electronic cigarettes. The e-liquid can be evaporated into smoke by heating, and this process will produce a high temperature of 200 ℃ ~ 300 ℃. Proto, the atomizer and its surrounding accessories must be made of materials with high temperature resistance and good heat dissipation, so as to withstand the high temperature of the heating atomization process, and will not damage the atomizer due to heat accumulation. Navíc, the heating process can not produce peculiar smell and destroy the taste of smoke, a současně, it must have sufficient strength. Takto, it can continue to be used after a moderate to mild bump or fall, and it will not be broken.

Polyether ether ketone (PROHLÉDNĚTE) material is selected as the material of the atomizer oil tank of the high-end electronic cigarette. PEEK is a unique semi-crystalline, thermoplastic engineering plastic with excellent chemical properties. It is often used in hot water or steam environment, can maintain a high level of bending strength and tensile strength, and can withstand high temperatures. The long-term use temperature can reach 260℃, and there is no smell at high temperature, and the thermal conductivity is good.

Machining of electronic cigarette accessories

Although for the atomizer, PEEK can meet all the above requirements and is the best choice for comprehensive performance. But the price of PEEK is very high, reaching about 1,000 yuan/kg.

The upper cover shell of the high-end electronic cigarette atomizer is made of polyphenylsulfone resin (PPSU) modified material. PPSU is a new type of non-crystalline thermoplastic engineering plastic with light weight, vysoká síla, good smell at high temperature, and does not contain BPA. In the case of repeated heating, it will not denature, it can be sterilized, and it can be in contact with water for a long time. Even if PPSU is immersed in hot water at 90°C for 1 year, its mechanical properties will not decrease. The upper cover of the atomizer made of PPSU can meet the safety requirements under heated conditions. Ve stejnou dobu, the PPSU material is tough, the appearance of the injection molded parts is good, and the hand feel is also good. It can meet the strength requirements of parts when inserting and pulling out, and improve the positioning accuracy during mold clamping.

The requirements for the plastic parts of the tobacco rod and suction nozzle are not very high. As long as it can ensure good appearance, spray coating, and electroplating, the nozzle part can meet the requirements of food grade, and the material is hard and not easy to scratch. Proto, generally used plastics such as PC, břišní svaly, PP, PE and so on are generally used on cigarette rods and suction nozzles, which are cheap and can meet the requirements of use after electroplating and spraying treatment.

Some high-end electronic cigarette holders will use polyetherimide (PEI) materials. PEI is an amorphous thermoplastic with high mechanical strength and rigidity, and has very high creep resistance in a wide temperature range and long-term high temperature. Navíc, it also has very good hydrolysis resistance and dimensional stability, can withstand high temperatures of 200°C, is odorless at high temperatures, and has good thermal conductivity and safety.

Navíc, there are also brands of cigarette holders that use polyoxymethylene (POM), commonly known as Saigang. Polyoxymethylene has high strength and rigidity, good elasticity and good wear resistance, and can be used for a long time in the temperature range of -40℃~100℃.