Parts finishing is an algorithm based on curved surfaces. For multi-curved models, the lifting of the milling cutter should be reduced as much as possible. This requires that the generated milling tool path be within the same angular range o....
The high-speed milling system is a complex dynamic system, which is prone to chatter vibration when machining thin parts. Flutter is a very strong relative vibration between the tool and the workpiece during the milling process. This kind of....
One hundred years ago, high-speed steel cutting tools began to be used, and the cutting speed for milling ordinary steel was only 25-30m/min. Compared with carbon tool steel and alloy tool steel, the processing at that cutting speed is high-....
1. Manual programming of CNC machining Manually complete all the work of programming (including computer-aided numerical calculation) for manual programming. For parts with simple geometric shapes, the numerical calculation is simpler and th....
Intelligent CNC machine tool manipulator realizes automatic turning and processing of parts. Through the application of intelligent CNC machine tools to establish automated turning parts. It can meet the mass automatic processing of both sid....
CNC machining parts, PCB board milling positioning design
The so-called positioning of CNC milling is to use positioning pins to position the printed circuit board to be processed on the worktable of the milling machine, so as to conveniently and acc....
The traditional method of hole processing is firstly by fitter marking and positioning, then fixing the positioned tube sheet etc. on a vise, and drilling the hole with a radial drill. For large apertures, or even products that have to under....
Keywords: CNC, machine tool Numerical control processing technology is derived from conventional processing technology and is an organic combination of conventional processing technology, computer numerical control technology, computer-aided....
Keywords: CNC machining of mold cores , CNC machining The core and cavity of the mold often have various free-form surfaces, which are very suitable for processing on CNC machine tools. The process of CNC machining is quite different from th....
Since the machining center is generally developed on the basis of a milling machine, it can be called a gantry milling machine machining center, and it is customarily referred to as a gantry machining center for short. The gantry machining c....