بالقطع, طحن الأجزاء الميكانيكية غير القياسية

تتضمن المعالجة الدقيقة باستخدام الحاسب الآلي بشكل أساسي الخراطة الدقيقة, مملة بشكل جيد, طحن غرامة, عمليات الطحن والطحن الدقيقة:

(1) تحول جيد وممل جيد: معظم السبائك الخفيفة الدقيقة (سبائك الألومنيوم أو المغنيسيوم, إلخ.) تتم معالجة الأجزاء الموجودة في الطائرة في الغالب بهذه الطريقة. عمومًا, natural single crystal diamond tools are used, and the radius of the blade arc is less than 0.1 microns. Machining on a high-precision lathe can obtain an accuracy of 1 micron and a surface unevenness with an average height difference of less than 0.2 microns, and the coordinate accuracy can reach ±2 microns.

Machining and grinding of non-standard steel, سبيكة, الفولاذ المقاوم للصدأ: pistons, turbine sleeves, fixed sleeves, spacer rings, washers, shaft mounts, metal gears, piston cylinders (blackening/phosphating)

Precision piston grinding	معالجة طلاء الأكمام التوربينية
Blackening and phosphating of the fixed sleeve	Spacer ring, washer
Shaft fixing seat	Metal gear

(2) Fine milling: used to process aluminum or beryllium alloy structural parts with complex shapes. Rely on the precision of the machine tool’s guide rail and spindle to obtain high mutual position accuracy. High-speed milling using a finely ground diamond head can obtain a precise mirror surface.

(3) Fine grinding: used for machining shaft or hole parts. Most of these parts are made of hardened steel, which has high hardness. Most high-precision grinding machine spindles use static pressure or dynamic pressure liquid bearings to ensure high stability. The ultimate accuracy of grinding is not only affected by the rigidity of the machine tool spindle and bed, but also related to the selection and balance of the grinding wheel, and the machining accuracy of the center hole of the workpiece. Fine grinding can obtain a dimensional accuracy of 1 micron and an out-of-roundness of 0.5 micron.

(4) طحن: Use the principle of mating parts to selectively process irregular convex parts on the processed surface. Abrasive particle diameter, cutting force and cutting heat can be precisely controlled, so it is the highest precision machining method in precision machining technology. The hydraulic or pneumatic fittings in the precision servo parts of the aircraft, and the bearing parts of the dynamic pressure gyro motor are all processed in this way. To achieve an accuracy of 0.1 or even 0.01 microns and a microscopic unevenness of 0.005 microns.

CNC machining of piston cylinder