English
العربية
中文(漢字)
Čeština
Dansk
Nederlands
Suomi
Français
Deutsch
Italiano
日本語
ಕನ್ನಡ
한국어
Português
Русский
Slovenčina
Español
Svenska
Türkçe
Customized Machining Titanium Flange
Titanium flange is a part made of titanium or titanium alloy, also called flange flange or flange. Flange is a part that connects between shaft and shaft and is used for connection between pipe ends. It is also useful for flanges on the inlet and outlet of equipment for the connection between two equipment, such as reducer flanges. Flange connection or flange joint refers to a detachable connection in which flanges, gaskets and bolts are connected to each other as a set of combined sealing structures.
Titanium flange is a part made of titanium or titanium alloy, also called flange flange or flange. Flange is a part that connects between shaft and shaft and is used for connection between pipe ends. It is also useful for flanges on the inlet and outlet of equipment for the connection between two equipment, such as reducer flanges. Flange connection or flange joint refers to a detachable connection in which flanges, gaskets and bolts are connected to each other as a set of combined sealing structures.
Pipe flange refers to the flange used for piping in the pipeline installation, and refers to the inlet and outlet flanges of the equipment when used on the equipment. There are holes on the flanges and bolts make the two flanges tightly connected. The flanges are sealed with gaskets. The flange is divided into threaded connection (threaded connection) flange, welding flange and clamp flange. Flanges are used in pairs, low-pressure pipes can use wire flanges, and welded flanges for pressures above four kilograms. A gasket is added between the two flanges and then tightened with bolts. The thickness of flanges with different pressures is different, and the bolts they use are also different.
- Product specifications
Product surface: forged surface, rolled surface, turned surface, polished surfaceSpecifications: Various specifications are produced according to flange standards, and non-standard flanges specified by customers can also be produced according to drawings.
3. Delivery status: machined polished surface
4. Production methods: free forging, die forging, precision forging, welding
5. Inspection method: radiographic inspection, coloring, flaw detection, water pressure test and other inspections can be done according to customer needs.6. Material
TA1 (Grade 1), TA2 (Grade 2), TC4 (Grade 5), titanium alloy flange7. Performance standards
TA1/Gr1, TA2/Gr2, TC4/Gr5, Grade7, Grade9, Grade12
weld neck titanium flange
v band Titanium blind flange
Butt welding titanium flange size
ti 6al 4v titanium alloys exhaust pipe flange
Standard value
Grade | Al | V | N.max | C.max | H.max | Fe.max | O.max | Margin (single) max | Margin (total) max |
TA1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | 0.1 | 0.40 | ||
TA2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | 0.1 | 0.40 | ||
TC4 | 5.5-6.75 | 3.5-4.5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 0.1 | 0.40 |
Mechanical performance reference standard | ||||
Grade | Mechanical properties at room temperature, not less than | |||
tensile strength | Yield Strength | Elongation | rate of reduction in area | |
TA1 | 240 MPa | 170MPa | 25% | 30% |
TA2 | 345 MPa | 275MPa | 20% | 30% |
TC4 | 895MPa | 825MPa | 10% | 20% |
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
Choose the right tool for CNC machining parts
When finishing large parts, in order to ensure that at least one pass is completed and to avoid changing the tool in the middle of cutting, the tool life should be determined according to the accuracy of the part and the surface roughness. Compared with ordinary machine tool processing methods, CNC machining puts forward higher requirements on cutting tools. It not only requires good steel and high precision, but also requires stable dimensions, high durability, and easy installation and adjustment for breaking and discharging performance, so as to meet the high efficiency requirements of CNC machine tools.
CNC milling and turning stainless steel Price
The main properties of stainless steel
The workability is much worse than that of medium carbon steel. Taking the machinability of ordinary No. 45 steel as 100%, the relative machinability of austenitic stainless steel 1Cr18Ni9Ti is 40%; The relative turning workability of ferritic stainless steel 1Cr28 is 48%; Martensitic stainless steel 2Cr13 is 55%. Among them, austenitic and austenitic + ferritic stainless steels have the worst machinability.
Die-Cast Aluminum, Copper, Stainless Steel Parts
Die casting is a die casting part: Using the pressure casting machine with the casting mold installed, the metal such as copper, zinc, aluminum, stainless steel or aluminum alloy heated to a liquid state is poured into the casting mold of the die casting machine for die casting. Casting copper, zinc, aluminum or aluminum alloy parts of the shape and size limited by the mold, such parts are often referred to as die casting parts. Die-casting parts are called differently in different places: such as die-casting parts, die-casting aluminum, die-casting zinc parts, die-casting copper parts, aluminum alloy die-casting parts, etc.