Product Categories
Product Tags
CNC Turning Precision Parts Service
CNC lathe processing is a high-tech processing method of precision hardware parts. Various types of materials can be processed: 316, 304 stainless steel, carbon steel, alloy steel, alloy aluminum, zinc alloy, titanium alloy, copper, iron, plastic, acrylic, POM, UHWM and other raw materials. It can be processed into a complex structure of square and round parts.
Category: CNC turning services
Tag: CNC turning
Turning refers to lathe processing, which is a part of mechanical processing. Lathe processing mainly uses turning tools for precision turning of rotating parts. Lathes are mainly used for machining shafts, discs, sleeves and other rotating or non-rotating parts with a rotating surface. It is the most widely used type of machine tool processing equipment in machinery manufacturing and repair factories.
CNC lathe processing is a high-tech processing method of precision hardware parts. Various types of materials can be processed: 316, 304 stainless steel, carbon steel, alloy steel, alloy aluminum, zinc alloy, titanium alloy, copper, iron, plastic, acrylic, POM, UHWM and other raw materials. It can be processed into a complex structure of square and round parts.
Technical problems of CNC turning
Turning processing is one of the most widely used in the machine manufacturing industry. The number of lathes is large, the staff is large, the processing range is wide, and the tools and fixtures used are numerous. Therefore, the safety technology of CNC turning processing is particularly important. Its key tasks are as follows:
1. Damage from cutting chips and protective measures. The steel materials of various parts processed on the lathe have good toughness, and the chips produced during turning are full of plastic curl and have sharp edges. During high-speed cutting of steel parts, red hot and long chips are formed, which are very easy to hurt people. At the same time, it is often wound on the workpiece, turning tool and tool holder. Therefore, iron hooks should be used to clean or pull out in time during work, and stop to clean when necessary, but never remove or pull off by hand. In order to prevent chip damage, chip breaking, chip flow control measures and various protective baffles are often taken. The chip breaking measure is to grind chip breakers or steps on the turning tool; Use appropriate chip breakers and mechanical clamping tools.
2, Clamping of the workpiece.
In the process of turning, there are many accidents caused by improper clamping of the workpiece: such as damage to the machine tool, broken or broken tool, and the workpiece falling or flying out of the accident. Therefore, in order to ensure the safe production of turning processing, special attention must be paid when clamping the workpiece. Choose suitable fixtures for parts of different sizes and shapes. Regardless of the three-jaw, four-jaw chuck or special fixture and the main shaft connection must be stable and reliable. The workpiece should be clamped and clamped, and the sleeve can be used for clamping large workpieces. Ensure that the workpiece does not shift, fall off, or throw out when the workpiece is rotated at high speed and subjected to cutting force. If necessary, use top clamps, center frames, etc. to enhance clamping. Remove the handle immediately after the card is tightened.
3. Safe operation of lathe.
Before working, check the machine tool thoroughly and confirm it is good before use. The clamping of the workpiece and the tool ensures the correct position, firmness and reliability. During the machining process, the equipment must be stopped when changing tools, loading and unloading workpieces, and measuring workpieces. Do not touch the workpiece or wipe it with cotton silk when rotating. It is necessary to select the cutting speed, feed rate and cutting depth appropriately, and no overload processing is allowed. Workpieces, fixtures and other sundries must not be placed on the top of the lathe, the tool rest, and the bed. When using a file, move the turning tool to a safe position, with your right hand in front and your left hand in the back to prevent the sleeves of your clothes from getting caught. The machine tool must have a dedicated person responsible for use and maintenance, and other personnel must not use it.
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
CNC lathe parts processed by milling and cutting
Processing features: side milling, slotting on the shaft surface. For the two parts, four cylinders protruding longitudinally on the shaft surface are milled on the side, and curved grooves on the shaft surface are milled on the side. CNC lathe processing with power tool head, the tiny milling blade mills out flats or grooves of various sizes.
The two products on the left are made of brass. Nickel-plated connector parts are the connectors of data network cables, and the connection plugs of computers or video equipment are common. The outer diameter is 16mm and the length is 25mm. The other copper part is the copper valve core of the flow control valve, with a maximum diameter of 11mm and a total length of 30mm.
CNC Lathe Turning Complex Shape Parts Groove
An example of a larger CNC lathe turned part.
The left part of the picture is a larger stainless steel turning part. Material SUS304, hexagonal opposite side H (height) 45mm, turning thread, turning inner wall, two-level through hole. Although the shape and installation are simple, the machining volume of turning is large. The big picture is attached.
Customized Machining Titanium Flange
Titanium flange is a part made of titanium or titanium alloy, also called flange flange or flange. Flange is a part that connects between shaft and shaft and is used for connection between pipe ends. It is also useful for flanges on the inlet and outlet of equipment for the connection between two equipment, such as reducer flanges. Flange connection or flange joint refers to a detachable connection in which flanges, gaskets and bolts are connected to each other as a set of combined sealing structures.
Stainless steel precision casting manufacturer
Stainless steel precision casting is also called investment casting, silica sol process. It is a casting process that requires less cutting of parts or no machining. It is an excellent process technology in the foundry industry, and its application is very wide. Not only is it suitable for casting of various types and alloys, but the dimensional accuracy and surface quality of the produced castings are higher than other casting methods. Complex, high-temperature resistant, difficult-to-process castings can be cast by investment casting.
Turned parts of free-cutting steel, carbon steel, and environmentally friendly iron
our company also produces various free-cutting steel carbon steel turning parts. These carbon steels include:
Free cutting steel 12L14
The picture on the left is a representative carbon steel turning part of our company. The surface is blackened and oxidized. Generally, turning parts of carbon steel require surface treatment to prevent rust. Available surface treatments include:
Galvanized (including environmentally friendly blue and white zinc and environmentally friendly color zinc), nickel-plated, black oxide (as shown in the left picture), etc.