cnc turning technology

CNC Machining of Pressure Sensor Shell of Air Compressor

stainless steel transmitter housings
08 May
stainless steel transmitter housings

stainless steel transmitter housings

CNC turning of the sensor housing, Turned stainless steel pressure sensor housings, stainless steel transmitter housings, instrument accessories, automotive sensor housings and other products. Have a complete and scientific quality management system.
Brand: Turning of air compressor pressure sensor shell
Standard: National Standard
Material: 303, 304 stainless steel
Tolerance: plus or minus 0.01mm, high precision, non-slippery inner hole, no burr
Specifications: According to the requirements, drawings and samples are customized in batches
Introduction: Professional hardware accessories processing factory

304 is a versatile stainless steel, which is widely used to make equipment and parts that require good overall performance (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must contain more than 18% chromium and more than 8% nickel. 304 stainless steel is a grade of stainless steel produced in accordance with the American ASTM standard.

Turned stainless steel pressure sensor housings

Turned stainless steel pressure sensor housings

Tags:
, ,
Newer machining of metal parts of blood pressure meter and valve
Back to list
Older Machining of hardware parts for motor trains

Related Posts

Electronic copper parts
16 May
cnc turning technology, milling technology

The characteristics of turning copper parts

Copper alloy machining (turning, milling) has excellent performance and low resistivity. Good ductility, high thermal and electrical conductivity, so it is the most commonly used material in cables, connectors, and electrical and electronic components. It can also be used as a building material and can be composed of many kinds of alloys. The most important of these are: beryllium copper, phosphor bronze, bronze and brass. In addition, copper is also a durable metal that can be recycled many times without compromising its mechanical turning and milling performance.

Continue reading

Turning and milling miniature precision watches, mobile phone parts
16 May
cnc turning technology, milling technology, Stainless steel parts

Development of micro-turning and milling parts

In recent years, civil defense and other fields demand for a variety of CNC machining miniaturization of products continues to increase, the function of the tiny devices, the complexity of the structure, reliability requirements are also increasing. Therefore, it is of great significance to research and develop micro-machining technologies that are economically feasible, capable of processing three-dimensional geometric shapes and diversified materials, and feature sizes ranging from micrometers to millimeters. At present, micro-cutting has become an important technology to overcome the limitations of MEMS technology.

Continue reading

Micro CNC machining parts technology
16 May
cnc turning technology, milling technology

Super finishing of turning and milling micro parts

The micro CNC machining technology adopts a fully automatic method to super-finish the surface of metal parts. Through a kind of mechanochemical action, the material of 1-40μm on the surface of the metal parts is removed, and the surface quality of the processed surface reaches or is better than the N1 level of the ISO standard. Micro CNC machining technology is mainly used in the two fields of ultra-precision polishing and ultra-precision brightening.

Continue reading

CNC turning of medical titanium alloy parts
14 May
cnc turning technology, Prototype technology

Design the correct CNC machining part program

The ideal CNC machining program should not only ensure that qualified workpieces conforming to the drawings are processed, but also should enable the functions of the CNC machine tool to be reasonably applied and fully utilized. The CNC machine tool is a highly efficient automation equipment. Its efficiency is 2 to 3 times higher than that of ordinary machine tools. Therefore, to give full play to this feature of CNC machine tools, one must master its performance, characteristics, and operating methods. At the same time, the machining plan must be correctly determined before programming.

Continue reading

CNC machining large aluminum cavity parts
10 May
milling technology

Machining of large and thin-walled aluminum parts

For CNC machining of aluminum parts with a large margin (large, thin-walled, aluminum cavity parts), in order to have better heat dissipation conditions during the machining process and avoid heat concentration, symmetric machining should be used during machining. If there is a 90mm thick aluminum sheet that needs to be machined to 60mm, if one side is milled, the other side should be milled immediately, and the flatness can only reach 5mm after processing to the final size at a time;

Continue reading

Fixture positioning device
10 May
milling technology

How to solve the deformation of thin parts in CNC machining?

Turning and milling thin parts (aluminum, aluminum alloy, pure titanium, copper, magnesium alloy) are always prone to deformation during machining. Oval or “waist shape” with a small middle and large ends, which makes it difficult to ensure the quality of parts. Its clamping design is often the most discussed point. Let’s take a look at two design examples of thin-walled fixtures on turning and milling parts, and how they solve the deformation problem.

Continue reading

Machined Medical Titanium Components
09 May
Machining titanium technology

Manufacturer of Machined Medical Titanium Components

The medical application of titanium as a material is constantly expanding, new application possibilities in the human body are constantly being opened up. Parts made of titanium are used for pins, screws, wires and rods, plates, grids and cages to moving parts with joints such as replacements for fingers or toes. Replacing bones and joints from milled titanium parts and titanium assemblies is a complex task, but surgery, orthopedics and dentistry are indispensable without implants made of titanium.

Continue reading

5G base station heat sink housing
09 May
milling technology, Prototype technology

5G base station’s heat sink cavity prototype

The project of aluminum alloy heat sink prototype. Its processing method is CNC processing, and the surface treatments used include sanding, laser engraving and sandblasting.
CNC machining: cnc tool apparatus above, according to the programmed path, the motion in the above material, the excess material is removed portion, whereby the prototype of the prototype model.

Continue reading

    Leave a Reply

    Your email address will not be published. Required fields are marked *