CNC machining of stainless steel parts, which is widely used in industry, poses a huge challenge to the tool industry. When developing new turning insert materials and chip-breaking geometries, we must consider their machinability. A group o....
The strength and hardness of 1Cr18Ni9Ti stainless steel is very low (hardness 187HB), and the plasticity is very high, with good acid resistance and corrosion resistance. Mechanical properties after solution treatment: Yield strength s0.2205....
KN95 Mask Machine Roller, Stamping Shaft and Press Wheel
1. The embossing roller cart of the mask machine is made of seamless steel pipe, and then processed by CNC. Processing is divided into turning, milling and welding. 2. Turning and milling: turn....
Flat face mask machine accessories, embossing shaft, press wheel, mask machine roller, roller
The roller is the main part of the rolling mill. It is subject to a certain impact during actual use, and the surface is rubbed by high-speed, high-tempera....
The machining of plastic products or parts can be divided into two categories: single-edge tool machining and multi-blade tool machining. Single-edge tool processing includes turning, planing, and toothless saw processing. Multi-edge tool pr....
This article introduces several CNC turning technologies for very specification materials: products include turning of soft rubber, turning of grinding wheels, turning of cemented carbide, turning of ceramics, turning of composite materials.....
This article analyzes the process settings for turning hardened steel, high temperature alloy, titanium alloy, chilled cast iron, and thermal spray material parts. And the characteristics of these difficult-to-cut materials, cutting quantiti....
Cutting is roughly divided into turning, milling, and center-tooth-based cutting (end face cutting of drills and end mills, etc.). The cutting heat of these cutting processes has different effects on the cutting edge. Turning is a continuous....
Difficult-to-machine materials are materials with poor turning and milling workability. Performance of this material is greater than or less indicators (HB 250, b 1000 MPa, 30%, k 100 MPa, K 41.8 W / mk) one or more, are all difficult to cut....
The development of turning center has a considerable part of rotating parts (someone estimates that it accounts for about 1/2). In addition to turning, operations such as milling, drilling, and tapping are also required. In addition, the pro....