Company News

Your position:Home > News > Company News >

The use and maintenance of NC machine tools

Writer: Kang Ding hardware Pubdate:2017-06-07 Source:CNC machining
Description:The use and maintenance of NC machine tools I. The use environment of numerical control equipment In order to improve the service life of numerical control equipment, it is generally required to avoid direct sunlight and other heat radiatio...

The use and maintenance of NC machine tools



I. The use environment of numerical control equipment

In order to improve the service life of numerical control equipment, it is generally required to avoid direct sunlight and other heat radiation, and avoid too humid, excessive dust or corrosive gas. Precision CNC equipment to keep away from large vibration equipment, such as punch, forging equipment.

Two 、 good power supply guarantee

In order to avoid the power fluctuation (greater than 10%) effects and possible interference signals, CNC equipment generally adopts the special power supply (such as from a single low voltage power distribution room for the use of CNC machine tools) or a voltage stabilizing device, can reduce the quality of power supply and electric interference.

Three, as far as possible less numerical control cabinet door and strong cabinet door

In a machine shop in the air often contain oil mist and dust, once they fall into the CNC system for printed circuit board or electrical components, is easy to cause the decrease of insulation resistance of components, and even cause damage to the circuit board or electrical components. Therefore, in the work should minimize the numerical control cabinet door and the strong electricity cabinet door.

Four, formulate effective operating procedures

In the use and management of CNC machine tools, a series of practical and effective operation procedures should be worked out. For example, lubrication, maintenance, reasonable use and standardized handover system are the main contents of the use and management of numerical control equipment. Working out and following the operating rules is one of the important measures to ensure the safe operation of CNC machine tools. Practice has proved that many failures can be reduced by following the operating procedures.

Five, CNC equipment should not be sealed for a long time

No processing tasks, CNC machine tools have regular electricity, electricity is the best weekly 1 ~ 2 times, each empty run for about 1 hours, using heat machine itself to reduce the humidity inside the machine, so that the electronic components are not caused by damp, but also can discover whether the battery is not enough alarm. In order to prevent the loss of system parameter settings.

The regular maintenance of CNC machine tools will affect the accuracy of machining centers and even affect the service life of machine tools.


                                                           CNC machine tools

Contact us
Contact us

Tel:(+86)769-83811196

SKYPE:yaxun88

Email:cnc@cncstamping.com

Add:No. 51 Luming Road Heavy River Management District - Qing Town Dongguan City

[Up] 
Services Online

Services1

Services2

SKYPE:yaxun88

Tel:
(+86)769-83811196

WeChat